Name: Jumo JUMO Quantrol Panel Mount PID Controller 1 Input, 1 Output Relay 240V ac PID Controller
Brand: Jumo
SKU: 279-156
Price: 622580.80 KRW
Availability: BackOrder

수량

수량 선택 또는 입력

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Jumo
	Output Type	Relay
	Product Type	PID Controller
	Number of Inputs	1
	Number of Outputs	1
	Maximum Current	3A
	Maximum Operating Temperature	55°C
	Minimum Operating Temperature	-5°C
	Control Type	PID Controller
	Terminal Type	Screw
	Maximum Supply Voltage	240V ac
	Digital Comms	RS485 Interface
	Firing Mode	Firing Curve
	Diagnostics	Measuring Circuit Monitoring (Probe/Cable Fault Detection)
	Maximum Voltage	230V
	Display Type	LED
	Standards/Approvals	EN 61010, EN 61326-1, UL
	IP Rating	IP65, IP20
	Input Type	Universal Analogue Input
	Series	JUMO Quantrol
	Mount Type	Panel Mount

	모두 선택
	브랜드 Jumo
	Output Type Relay
	Product Type PID Controller
	Number of Inputs 1
	Number of Outputs 1
	Maximum Current 3A
	Maximum Operating Temperature 55°C
	Minimum Operating Temperature -5°C
	Control Type PID Controller
	Terminal Type Screw
	Maximum Supply Voltage 240V ac
	Digital Comms RS485 Interface
	Firing Mode Firing Curve
	Diagnostics Measuring Circuit Monitoring (Probe/Cable Fault Detection)
	Maximum Voltage 230V
	Display Type LED
	Standards/Approvals EN 61010, EN 61326-1, UL
	IP Rating IP65, IP20
	Input Type Universal Analogue Input
	Series JUMO Quantrol
	Mount Type Panel Mount

COO (Country of Origin):: DE

The Jumo Compact controller is used for 2 state controller and 3 state controller and the control of regulating valve. The universal analogue input for RTD temperature probe, thermocouple or current/voltage signal is freely programmable. Setpoint value, actual value and all parameters are shown on two 7-segment LED displays with one or two decimal place. The values can be shown in °C or in °F. The binary input can be used, for example, to reduce operation and setting, to activate a ramp or a timer or to start auto tuning. There are two relay outputs with a switching capacity of 3 A / 230 V and a binary input. Additionally a special firing curve can be used for small ceramic kilns so there can be a controlled start up and a time dependent burning. Setpoint value, gradient and burning time can be entered at the device by the operator. As an alternative to the front side operation, the controller can be programmed by a setup program und USB interface without a additional power supply.

Switch position of the relays are shown with yellow LEDs

Each relay can be assigned a different function

Voltage supply is AC 110 to 240 V

Controller got a ramp function with adjustable gradients for continuously changing the set point value

Jumo JUMO Quantrol Panel Mount PID Controller 1 Input, 1 Output Relay 240V ac PID Controller

관련된 링크들