Jumo 701510 Panel Mount Digital Indicator 3 Input Relay 30V dc Controller

모든 Temperature Controllers 열람하기

Subtotal (1 unit)*

₩431,800.28

Add to Basket
수량 선택 또는 입력
단종되는 중
  • 최종적인 3 개 unit(s)이 배송 준비 됨
수량
한팩당
1 +₩431,800.28

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
278-794
제조사 부품 번호:
701510/8-0000-25/000
제조업체:
Jumo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Jumo

Output Type

Relay

Product Type

Digital Indicator

Number of Inputs

3

Maximum Current

20mA

Maximum Operating Temperature

55°C

Minimum Operating Temperature

-10°C

Terminal Type

Spring Cage Terminal

Control Type

Controller

Maximum Supply Voltage

30V dc

Auxiliary Power Supply

110 to 240 VAC

Digital Comms

Modbus RTU/ASCII via TCP, RS485 Modbus RTU Slave, Ethernet/Modbus TCP

Maximum Voltage

230V

Display Type

701513 Digit, 18 Segment LCD, LCD, 701514

Standards/Approvals

Bureau Veritas, DIN EN 60529, UL 61010-1, EN 61326-1, CAN/CSA-22.2 No. 61010-1, EN 61010, DNV GL

IP Rating

IP65, IP20

Length

89mm

Width

48 mm

Mount Type

Panel Mount

Series

701510

Input Type

Potentiometer, Thermocouple, Current, Digital, Voltage, Analogue

Panel Depth

24mm

COO (Country of Origin):
DE
The Jumo Universal Applicable Digital Indicator in the small DIN landscape format is suitable for the front installation to display temperature, pressure and other process variables. The version has individual display elements for the switch position of the outputs and also for manual mode, ramp function and timer. The display is operated by a membrane keyboard with four keys and can be used at rough environmental influences because of the high protection type IP65. The digital indicator has a min-max-value-display function, hold-function, tare function, limit value monitoring function, digital control signal, wide timer function an a service counter. The configuration is about the USB interface it does not need a separate voltage supply (USB powered). In the hardware is also a universal input, two relay outputs (normally open contact), a digital input and a digital in- and output included. The voltage supply range is AC/DC 20 to 30 V, 48 to 63 Hz.

Characterized by easy and clearly structured with text-supported operation

Process value and parameters shown on two 18-segment LCD displays

Configured via computer using the setup program and including program editor and ST editor

관련된 링크들