Subtotal (1 unit)*
₩396,340.00
제조사가 재고 비축중
- 2026년 10월 30일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩396,340.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 465-029
- 제조사 부품 번호:
- PHF TB5050X100MM
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Bearing Assembly | |
| Bore Diameter | 100mm | |
| Outside Diameter | 178mm | |
| Length | 127mm | |
| Material | Cast Iron | |
| Bush Number | 5050 | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Bearing Assembly | ||
Bore Diameter 100mm | ||
Outside Diameter 178mm | ||
Length 127mm | ||
Material Cast Iron | ||
Bush Number 5050 | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- CN
SKF Taper Bush, 100mm Bore Size, 127mm Length - PHF TB5050X100MM
This taper bush provides a secure mechanical fastening solution for mounting components onto shafts in industrial settings. It is intended to produce a concentric fit between a hub and a shaft, allowing accurate torque transmission and straightforward assembly in automation, electrical and mechanical equipment.
Features and Benefits:
• Cast iron construction for sustained load-bearing capacity
• 100mm internal bore for compatibility with standard shaft sizes
• 127mm axial length to ensure stable axial positioning
• 178mm external diameter for robust hub engagement
• Tapered profile enabling controlled shrink-fit between parts
• 100mm internal bore for compatibility with standard shaft sizes
• 127mm axial length to ensure stable axial positioning
• 178mm external diameter for robust hub engagement
• Tapered profile enabling controlled shrink-fit between parts
Applications
• Suitable for mounting pulleys in conveyor drive systems
• Ideal for coupling hubs in industrial gearboxes
• Used with motor shafts in automation lines
• Can be used for retrofitting rotating assemblies in manufacturing equipment
• Ideal for coupling hubs in industrial gearboxes
• Used with motor shafts in automation lines
• Can be used for retrofitting rotating assemblies in manufacturing equipment
How does the component achieve a secure fit on the shaft?
The tapered geometry generates radial expansion against the shaft when the bush is driven into the mating hub, creating frictional contact that transmits torque without additional machining.
Which material characteristics affect its wear performance?
The grey cast iron composition offers hardness and damping properties that resist surface fatigue and reduce vibration during continuous operation.
What should be considered when replacing an existing sleeve?
Verify outer hub bore clearance and shaft diameter match the specified internal and external dimensions to avoid misalignment during installation.
How does the length influence axial stability in assemblies?
A longer axial engagement distributes load over a greater contact area, reducing stress concentrations and helping maintain concentricity under side loads.