Eaton 125A British Standard Fuse A4 415V ac, 94 mm

대량 구매 할인 받기

25개 더 담고 2% 할인 받기

View bulk pricing options

Subtotal (1 unit)*

₩58,540.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 66 개 단위 배송 준비 완료
  • 추가로 2026년 11월 27일 부터 26 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
절감
1 - 24₩58,540.00-
25 - 99₩56,900.002%
100 +₩54,820.006%

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
139-956
제조사 부품 번호:
DEO125
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Product Type

British Standard Fuse

Current Rating

125A

Fuse Size

A4

Voltage

415V ac

Standards/Approvals

RoHS

Fixing Centres

94 mm

Tag Width

19mm

High Rupture Capacity

Yes

Length

47mm

Tag Orientation

Offset

Overall Length

110mm

Height

47mm

Width

31mm

Diameter

29.5mm

Series

DEO

제외

Eaton British Standard Fuse, 125A, 415V AC DEO125


Protect industrial equipment and devices from electrical faults with this British Standard fuse from Eaton. It blows quickly in the event of a short circuit or overcurrent to prevent voltage spikes from damaging components. By detecting both high-current and low-current faults, it improves safety in your electrical system. A fuse like this is suitable for 3-phase commercial lighting and security systems, as well as automated industrial processes. Because it features a high-rupture capacity, it's able to handle large short-circuit current flows. It offers consistent performance throughout its service life and is resistant to environmental ageing. As a result, it doesn't need maintenance.

• Suitable for high-density mounting on a control panel, thanks to its low-temperature rise

• Easily replaced when it blows

How do I attach this fuse to a fuse holder?


This fuse is supplied with tags that allow you to easily bolt it to a fuse holder. Its tags are solidly fixed to its body and create an air-tight seal to stop energy escaping in the event of an overload.

Eaton Bussmann HRC Offset Tag Fuses - BS88 British Standard Fuses


Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

Features & Benefits


• The low-temperature rise enables the fuse to be suitable for high-density mounting

• Fuse links, specifically designed for the protection of equipment

• Conforms to industry standards

• Low voltage fuse

• High rupture capacity (HRC)

• Suitable for three-phase applications

• Suitable for type 2 co-ordinated applications as defined in IEC 947-4

• Low power loss, typically 20% lower than the requirements of BS 88

Why use a slotted tag fuse?


A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

Note

Eaton formerly known as Bussmann

관련된 링크들