Recom Switching Regulator, Through Hole, 5V dc Output Voltage, 6.5 → 32V dc Input Voltage, 1A Output Current, 1

Non isolated
Medical safety approval EN-60601-1-2
No need for heat sinks
High efficiency
Wide input voltage range, up to 34V
Thermal shutdown and continuous short circuit protection
Low ripple and noise
Low profile
Pin-out compatible with LM78XX Linear regulators
”L” version with 90° pins

De-rate above 71°C operating temperature.
MTBF to MIL-HDBK 217F.

EN-55022, EN-55024, EN-60601-1-2, EN-60950-1

Looking for a reliable energy converter for your PCB? Choose this switching regulator from RECOM. It transforms input voltages between 6.5 and 32V DC to a steady output voltage of 5V DC, so it's a good choice for use in low-power applications. The compact dimensions of 11.5 (L) x 8.5 (W) x 17.5mm (H) make it suitable for installation in busy setups. It features continuous short-circuit protection with automatic recovery to protect your system against damage and reduce downtime in the event of a fault. Thanks to a mean time between failures of 6,584,000 hours at +25°C, this is a long-lasting choice.

• Wide operating temperature range between -40°C and +85°C for use in demanding conditions
• Non-conductive plastic case helps to reduce the risk of electric shocks
• Pins have a 90° orientation for side mounting, to suit installation in tight spaces

• Consumer devices
• Battery-powered systems
• Research and development labs

No. Thanks to the component's high efficiency of 88 to 93%, it wastes little energy as heat, so there's no need to use a heat sink.