TRACOPOWER Switching Regulator, Through Hole, 3.3V dc Output Voltage, 4.75 → 36V dc Input Voltage, 1A Output

모든 Switching Regulators 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 10 units)*

₩76,986.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 15일 부터 25 개 단위 배송
  • 추가로 2025년 12월 22일 부터 62 개 단위 배송
  • 추가로 2025년 12월 25일 부터 39 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Tube(s)
Per Tube
한팩당*
1 - 1₩76,986.00₩7,698.60
2 - 3₩75,275.20₩7,527.52
4 +₩73,677.20₩7,367.72

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
124-7655
제조사 부품 번호:
TSR 1-2433
제조업체:
TRACOPOWER
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

TRACOPOWER

Output Voltage

3.3V dc

Output Current

1A

Input Voltage

4.75 → 36V dc

Mounting Type

Through Hole

Number of Outputs

1

Package

SIP 3

Power Rating

3.3W

Efficiency

90 → 79%

Ripple And Noise

50mV Pk-Pk

Minimum Temperature

-40°C

Maximum Temperature

+85°C

Series

TSR 1

Line Regulation

±0.2%

Depth

10.2mm

Length

11.7mm

Load Regulation

±0.4%

MTBF

5350000h

Width

7.6mm

Weight

1.9g

COO (Country of Origin):
TW

Traco Power Switching Regulator, SIP3 Package, 91% Efficiency - TSR 1 Series - TSR 1-2433


Need to bring your system's input voltage down a notch? Put this switching regulator from Traco Power in control. It takes 4.75 to 36V DC inputs and converts them to the stable 3.3V DC output needed by applications such as IoT devices and industrial automation systems. Electrical glitches are no problem, as the device comes with short-circuit protection and automatically reboots after a fault to cut downtime. The regulator operates at 91% efficiency so heat waste is minimised and there's no need to fit a heat sink.

• Ripple voltage of 50mV minimises disruption from electrical noise
• Voltage set accuracy of ±2% ensures a consistent power supply
• Measures just 11.7 (L) x 7.5 (W) x 10.1mm (D), so takes up little enclosure space
• Handles operating temperatures between -40°C and +85°C, for safe industrial use

Applications


• Radio communications
• Domestic appliances
• Electronics manufacturing

How do I mount this switching regulator?


This product is compatible with through-hole mounting, so you slot it into pre-drilled holes on your PCB and solder it in place to achieve a secure connection.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들