Recom Switching Regulator, Through Hole, 12V dc Output Voltage, 15 → 28V dc Input Voltage, 500mA Output Current,

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩4,737.60

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보
수량
한팩당
1 - 10₩4,737.60
11 - 20₩4,643.60
21 +₩4,549.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
122-8230
제조사 부품 번호:
R-78E12-0.5
제조업체:
Recom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Recom

Output Voltage

12V dc

Output Current

500mA

Input Voltage

15 → 28V dc

Mounting Type

Through Hole

Number of Outputs

1

Package

TO-220

Power Rating

6W

Efficiency

95%

Ripple And Noise

70mV Pk-Pk

Minimum Temperature

-40°C

Maximum Temperature

+85°C

Series

R-78E-0.5

Line Regulation

±0.5%

MTBF

2182000 (+85 °C)h

Power Signal Conversion Type

DC-DC

Load Regulation

±1%

Width

8.5mm

Protection Features

Over Temperature Protection, Overload Protection, Short Circuit Protection

Application

Industrial

Weight

2g

Depth

10.4mm

Length

11.6mm

Maximum Input Current

1.5mA

Switching Frequency Range

570kHz

COO (Country of Origin):
TW

R78E Series Switching Regulator


The Recom R-78E series are highly efficient, non-isolated switching regulators. They offer a high-quality product at a low cost in production quantity. Coupled with the compact design, this module is ideal across a number of industrial applications.

With a high start-up current capability and a high efficiency of up to 95%, there is no need for heat sink and with the compact SIP3 package important space on the board is also saved.

Features and Benefits


• R-78E Series
• Low cost switching regulator
• High start-up current capabilities
• Short circuit protection
• High efficiency of up to 95%
• High efficiency, non-isolated, no need for heatsinks
• Pin compatible with 78 series regulators
• SIP3 package

Note

Power derates above 70°C

RECOM Switching Regulator, Through-Hole Mounting, DC-DC Conversion - R-78E-0.5 Series - R-78E12-0.5


Need a stable 12V DC supply for your equipment? This switching regulator from RECOM takes an input voltage anywhere between 15V and 28V DC and outputs a steady 12V DC. Line regulation of ±0.5% and load regulation of ±1% ensure a consistent supply, even if there are fluctuations in supply and demand. High efficiency of 95% reduces heat dissipation, meaning you won't need a separate heatsink. The compact SIP3 package saves space on your board.

Features & Benefits


• Operating temperature range of -40°C to +85°C makes it suitable for harsh environments
• Ripple and noise of 70 mV Pk-Pk reduce risk of damage due to overheating
• MTBF of 2,182,000h at +85°C for a long service life
• Through-hole mounting creates a strong connection with your PCB

Applications


• Military hardware
• Steel mills
• Lifts

What's load regulation?


Load regulation is the measure of a power supply's ability to output a constant voltage when the output current fluctuates. The smaller the percentage, the more stable the supply.

What's line regulation?


Line regulation is similar to load regulation in that it's a measure of a power supply's ability to maintain a constant voltage despite fluctuations in current. Load regulation refers to the output, whereas line regulation refers to the input.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들