제조사부품번호

Infineon Switching Diode, 28 A, 2-Pin 650 V PG-TO-220 IDV20E65D1XKSA1

RS 제품 번호:: 273-2949
제조사 부품 번호:: IDV20E65D1XKSA1
제조업체:: Infineon

Infineon Switching Diode, 28 A, 2-Pin 650 V PG-TO-220 IDV20E65D1XKSA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 tube of 50 units)*

₩65,200.00

추가로 2026년 11월 02일 부터 100 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
50 - 50	₩1,304.00	₩65,180.00
100 +	₩1,210.00	₩60,520.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 273-2949
제조사 부품 번호:: IDV20E65D1XKSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	Switching Diode
	Maximum Forward Current If	28A
	Package Type	PG-TO-220
	Pin Count	2
	Peak Reverse Recovery Time trr	65ns
	Maximum Power Dissipation Pd	38W
	Minimum Operating Temperature	-40°C
	Maximum Forward Voltage Vf	1.35V
	Maximum Peak Reverse Repetitive Voltage Vrrm	650V
	Peak Non-Repetitive Forward Surge Current Ifsm	120A
	Maximum Operating Temperature	175°C
	Width	10.65mm
	Series	IDV20E65D1
	Length	16.15mm
	Standards/Approvals	Pb-free lead plating, RoHS
	Height	4.85mm

	모두 선택
	브랜드 Infineon
	Product Type Switching Diode
	Maximum Forward Current If 28A
	Package Type PG-TO-220
	Pin Count 2
	Peak Reverse Recovery Time trr 65ns
	Maximum Power Dissipation Pd 38W
	Minimum Operating Temperature -40°C
	Maximum Forward Voltage Vf 1.35V
	Maximum Peak Reverse Repetitive Voltage Vrrm 650V
	Peak Non-Repetitive Forward Surge Current Ifsm 120A
	Maximum Operating Temperature 175°C
	Width 10.65mm
	Series IDV20E65D1
	Length 16.15mm
	Standards/Approvals Pb-free lead plating, RoHS
	Height 4.85mm

Datasheet - IDV20E65D1XKSA1

Infineon IDV20E65D1 Series Switching Diode, 650V Peak Reverse Repetitive Voltage, 28A Maximum Forward Current - IDV20E65D1XKSA1

This switching diode is designed for Rapid switching applications where controlled recovery and high current handling are required. It operates across a wide ambient range and is supplied in a PG-TO-220 package for straightforward mounting in power assemblies. The device combines elevated voltage endurance with a Compact footprint, suitable for industrial power conversion and switching circuits.

Features and Benefits:

• 65ns recovery time reduces switching losses
• 28A forward current supports high load currents
• 650V reverse rating tolerates high voltage stress
• 120A surge capacity handles transient overloads
• Pb‑free lead plating and RoHS compliance eases assembly requirements

Applications

• Used for power supply rectification in switching converters
• Suitable for inrush protection in industrial electronics
• Ideal for motor drive switching stages
• Can be used for high‑voltage clamp circuits
• Used with heat‑sunk assemblies requiring through‑hole mounting

What thermal limits should be observed during operation?

The device can operate up to a 175°C junction temperature and down to -40°C, so thermal management must maintain safe case‑to‑ambient gradients.

How does the forward voltage affect conduction losses?

The maximum forward voltage is 1.35V, which determines conduction loss at the specified forward current and influences heat‑sink sizing.

What package considerations affect PCB layout?

The PG‑TO‑220 package with two pins requires through‑hole mounting and a footprint that accommodates its length and width for secure heat‑sink attachment.

How does surge capability impact transient performance?

A 120A non‑repetitive surge rating allows the component to withstand short‑duration overloads without immediate failure when used within the specified thermal limits.