Wurth Elektronik, WE-PD2 No Wirewound Surface Mount Inductor with a Ferrite Core, 100 μH Wirewound ±10 % 770 mA Idc
- RS 제품 번호:
- 522-7070
- Distrelec 제품 번호:
- 301-89-402
- 제조사 부품 번호:
- 74477520
- 제조업체:
- Wurth Elektronik
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩3,177.20
재고있음
- 29 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩3,177.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 522-7070
- Distrelec 제품 번호:
- 301-89-402
- 제조사 부품 번호:
- 74477520
- 제조업체:
- Wurth Elektronik
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Wurth Elektronik | |
| Product Type | Wirewound Surface Mount Inductor | |
| Inductance | 100 μH | |
| Maximum DC Current | 770mA | |
| Packaging | Tape & Reel | |
| Length | 7.8mm | |
| Automotive Standard | AEC-Q200 | |
| Shielding | No | |
| Maximum DC Resistance | 430mΩ | |
| Minimum Operating Temperature | -40°C | |
| Series | WE-PD2 | |
| Maximum Operating Temperature | 125°C | |
| Inductance Tolerance | ±10 % | |
| Core Material | Ferrite | |
| Termination Style | Surface Mount | |
| Standards/Approvals | RoHS | |
| Depth | 7mm | |
| Height | 5mm | |
| Maximum Self Resonant Frequency | 7MHz | |
| Inductor Construction | Wirewound | |
| 모두 선택 | ||
|---|---|---|
브랜드 Wurth Elektronik | ||
Product Type Wirewound Surface Mount Inductor | ||
Inductance 100 μH | ||
Maximum DC Current 770mA | ||
Packaging Tape & Reel | ||
Length 7.8mm | ||
Automotive Standard AEC-Q200 | ||
Shielding No | ||
Maximum DC Resistance 430mΩ | ||
Minimum Operating Temperature -40°C | ||
Series WE-PD2 | ||
Maximum Operating Temperature 125°C | ||
Inductance Tolerance ±10 % | ||
Core Material Ferrite | ||
Termination Style Surface Mount | ||
Standards/Approvals RoHS | ||
Depth 7mm | ||
Height 5mm | ||
Maximum Self Resonant Frequency 7MHz | ||
Inductor Construction Wirewound | ||
- 74477520 POWER-CHOKE WE-PD2 Data Sheet
- EMC Filter for DC/DC Switching Controller Optimised - Application Note
- Influence of Control Loop by an Output Filter - ANP006B Application Note
- Negative Input Resistance of Switching Regulators - Application Note
- Direct Current Losses at the Output Filter of a Switching Controller - ANP009B Application Note
- 8 Design Tips for Power Inductors from Wurth Elektronik - Application Note
- WE eiSos Embedded Flyer
WE-PD2 Series Wire Wound Chokes
WE-PD2 Series Open frame SMD Power Inductors with a current capability of up to 14 Amps. Recommended for reflow soldering, the WE-PD2 Series inductors are suitable for use in the following applications: Switching regulators with low operating voltage (computer, laptop, mobile phones and pagers); Integrated DC/DC-converter; Perfectly suitable for switching regulators with extremely high efficiency
Wurth Non Standard SMT Inductors (Chokes)
관련된 링크들
- Wurth Elektronik, WE-PD2 No Wirewound Surface Mount Inductor with a Ferrite Core, 100 μH Wirewound ±10 % 770 mA Idc
- Wurth Elektronik, WE-PD2 No Wirewound Surface Mount Inductor with a Ferrite Core, 56 μH Wirewound 10 % 770 mA Idc
- Wurth Elektronik, WE-PD2 No Wirewound Surface Mount Inductor with a Ferrite Core, 39 μH Wirewound 10 % 770 mA Idc
- Wurth Elektronik, WE-PD Yes Wirewound Surface Mount Inductor with a Ferrite Core, 1 mH Wirewound ±20 % 200 mA Idc
- Wurth Elektronik, WE-PD Yes Wirewound Surface Mount Inductor with a Ferrite Core, 470 μH Wirewound ±20 % 300 mA Idc
- Wurth Elektronik, WE-PD Yes Wirewound Surface Mount Inductor with a Ferrite Core, 220 μH Wirewound ±20 % 440 mA Idc
- Wurth Elektronik, WE-PD Yes Wirewound Surface Mount Inductor with a Ferrite Core, 220 μH Wirewound ±20 % 960 mA Idc
- Wurth Elektronik, WE-PD Yes Wirewound Surface Mount Inductor with a Ferrite Core, 820 μH Wirewound ±20 % 600 mA Idc