Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 100 kg, 415Ω
- RS 제품 번호:
- 443-8229
- 제조사 부품 번호:
- 1042-0100-F000-RS
- 제조업체:
- Tedea Huntleigh
Subtotal (1 unit)*
₩177,490.80
재고있음
- 추가로 2026년 3월 02일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩177,490.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 443-8229
- 제조사 부품 번호:
- 1042-0100-F000-RS
- 제조업체:
- Tedea Huntleigh
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Gauge Resistance | 415Ω | |
| Series | Model 1042 | |
| Sensor Type | Single Point | |
| Terminal Type | Wire | |
| IP Rating | IP66 | |
| Mount Type | Hole | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 25.4 mm | |
| Minimum Force/Load Measurement | 1kg | |
| Maximum Force/Load Measurement | 100kg | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 40°C | |
| Length | 40mm | |
| Depth | 25.4mm | |
| Standards/Approvals | OIML, NTEP | |
| 모두 선택 | ||
|---|---|---|
브랜드 Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Gauge Resistance 415Ω | ||
Series Model 1042 | ||
Sensor Type Single Point | ||
Terminal Type Wire | ||
IP Rating IP66 | ||
Mount Type Hole | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 25.4 mm | ||
Minimum Force/Load Measurement 1kg | ||
Maximum Force/Load Measurement 100kg | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 40°C | ||
Length 40mm | ||
Depth 25.4mm | ||
Standards/Approvals OIML, NTEP | ||
제외
Low Profile Aluminium
Compensated Temperature Range -10 to +40°C
Output Impedance 350 +/- 3Ω
Termination Type: Cable
Ultimate Overload: 300% of Rated Load
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range.
Dimensions: 20 x 40 x 150mm (1 to 30kg); 25.2 x 40 x 150mm (50 to 100kg)
Please also browse our range of output signal conditioners
관련된 링크들
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 5 kg
- Tedea Huntleigh Model 1042 Series S Type Load Cell, 1 kg, Compression Measure, 3 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 75 kg, 415Ω
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 200 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 50 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 20 kg