제조사부품번호

Tedea Huntleigh Model 1130 Series Low Profile Load Cell, 7 kg, Compression Measure, 30 kg, 385Ω

RS 제품 번호:: 185-6005
제조사 부품 번호:: 01130-030K-C3-11X
제조업체:: Tedea Huntleigh

Subtotal (1 unit)*

₩299,258.40

재고있음

9 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩299,258.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 185-6005
제조사 부품 번호:: 01130-030K-C3-11X
제조업체:: Tedea Huntleigh

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Tedea Huntleigh
	Force Measured	Compression
	Product Type	Load Cell
	Gauge Resistance	385Ω
	Series	Model 1130
	Sensor Type	Low Profile
	Terminal Type	Cable
	IP Rating	IP66
	Mount Type	Hole
	Maximum AC Voltage	15V ac
	Maximum DC Voltage	15V dc
	Housing Material	Stainless Steel
	Width	25 mm
	Minimum Force/Load Measurement	7kg
	Maximum Force/Load Measurement	30kg
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	40°C
	Depth	25mm
	Standards/Approvals	RoHS Compliant, NTEP, FM, IECEX, OIML R60, ATEX
	Length	30mm

	모두 선택
	브랜드 Tedea Huntleigh
	Force Measured Compression
	Product Type Load Cell
	Gauge Resistance 385Ω
	Series Model 1130
	Sensor Type Low Profile
	Terminal Type Cable
	IP Rating IP66
	Mount Type Hole
	Maximum AC Voltage 15V ac
	Maximum DC Voltage 15V dc
	Housing Material Stainless Steel
	Width 25 mm
	Minimum Force/Load Measurement 7kg
	Maximum Force/Load Measurement 30kg
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 40°C
	Depth 25mm
	Standards/Approvals RoHS Compliant, NTEP, FM, IECEX, OIML R60, ATEX
	Length 30mm

Datasheet 01130-030K-C3-11X

Model 1130 is a low profile stainless steel single-point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in harsh environments. The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. Constructed in stainless steel. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is acheived by feeding this voltage into the appropriate electronics.

Capacities 7–100 kg

Stainless steel construction

Single-point 400 x 400 mm platform

Applications

Harsh environment small platforms

Harsh environment check weighing

Tedea Huntleigh Model 1130 Series Low Profile Load Cell, 7 kg, Compression Measure, 30 kg, 385Ω

관련된 링크들