Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 20 kg
- RS 제품 번호:
- 185-6000
- 제조사 부품 번호:
- 01042-020K-C3-16X
- 제조업체:
- Tedea Huntleigh
Subtotal (1 unit)*
₩163,507.50
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩163,507.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 185-6000
- 제조사 부품 번호:
- 01042-020K-C3-16X
- 제조업체:
- Tedea Huntleigh
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1042 | |
| Sensor Type | Low Profile | |
| Terminal Type | Cable | |
| IP Rating | IP66 | |
| Maximum AC Voltage | 15V ac | |
| Maximum DC Voltage | 15V dc | |
| Housing Material | Aluminium | |
| Width | 20mm | |
| Maximum Force/Load Measurement | 20kg | |
| Minimum Force/Load Measurement | 1kg | |
| Minimum Operating Temperature | 10°C | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | ATEX, FM, NTEP, RoHS Compliant, IECEX, OIML R60 | |
| Length | 40mm | |
| Depth | 20mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1042 | ||
Sensor Type Low Profile | ||
Terminal Type Cable | ||
IP Rating IP66 | ||
Maximum AC Voltage 15V ac | ||
Maximum DC Voltage 15V dc | ||
Housing Material Aluminium | ||
Width 20mm | ||
Maximum Force/Load Measurement 20kg | ||
Minimum Force/Load Measurement 1kg | ||
Minimum Operating Temperature 10°C | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals ATEX, FM, NTEP, RoHS Compliant, IECEX, OIML R60 | ||
Length 40mm | ||
Depth 20mm | ||
Model 1042 is a low profile single-point load cell designed for direct mounting in weighing platforms. Its small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for retail, bench and counting scales. Capacities of 5 kg and above are supplied as standard in anodized Aluminium. A humidity resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extenstion, is achieved by feeding this voltage into the appropriate electronics.
Capacities 1–200 kg
Aluminium construction
Single-point 400 x 400 mm platform
High stiffness version available for dynamic weighing applications
Applications
Bench scales
Counting scales
Grocery scales
관련된 링크들
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 50 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 200 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 5 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series S Type Load Cell, 1 kg, Compression Measure, 3 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 100 kg, 415Ω