RS PRO Non-Fused Terminal Block, 2-Way, 25mm² Wire Screw
- RS 제품 번호:
- 868-0761
- 제조업체:
- RS PRO
Subtotal (1 unit)*
₩25,460.00
일시적 품절
- 2026년 8월 31일 부터 29 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩25,460.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 868-0761
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Number of Ways | 2 | |
| Product Type | Non-Fused Terminal Block | |
| Wire Size | 25mm² | |
| Mount Type | Cable | |
| Fused | No | |
| Contact Material | Nickel Plated Brass | |
| Material | Polycarbonate | |
| Voltage | 450V | |
| Wire Protection | No | |
| Cable CSA | 25mm² | |
| Colour | Transparent Blue | |
| Termination Type | Screw | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | 85°C | |
| Enclosed | Yes | |
| Hazardous Area Certification | IEC/EN 60695-2-11 | |
| Standards/Approvals | No | |
| Contact Plating | Nickel | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Number of Ways 2 | ||
Product Type Non-Fused Terminal Block | ||
Wire Size 25mm² | ||
Mount Type Cable | ||
Fused No | ||
Contact Material Nickel Plated Brass | ||
Material Polycarbonate | ||
Voltage 450V | ||
Wire Protection No | ||
Cable CSA 25mm² | ||
Colour Transparent Blue | ||
Termination Type Screw | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature 85°C | ||
Enclosed Yes | ||
Hazardous Area Certification IEC/EN 60695-2-11 | ||
Standards/Approvals No | ||
Contact Plating Nickel | ||
- COO (Country of Origin):
- IT
Twin Blocks with Indirect Clamping
The use of Twin-Block terminals is recommended to connect flexible copper cables from 10 to 120 sq.mm, ideal for applications in channels or conduits due to their compact size and ease of installation.
These Twin Block connectors guarantee a high degree of mechanical resistance and dielectric strength, and protection to IP 20 as required by CEI 64-8 part 5.
The particular structure and the clamping system allows you to make connections with a large contact area, without damage to the main conductor strands.
Twin-Blocks consist of:
Terminal screws in brass and steel with nickel plating and galvanizing treatmentsto protect against corrosion.and also provides increased protection in ammonia environments. The insulating body is made of self-extinguishing polycarbonate according to UL 94-V0, with a high degree of isolation. Clips to close and secure the connector are easy to operate and do not require the use of tools.
Multiple connections can be made in a single Twin Block if the total number of strands and area does not exceed the maximum permitted for a single conductor. The obvious advantage is the reduction of the number of blocks required and the corresponding ease and speed of installation.
Housing material: trasparent blue polycarbonate
Self-extinguishing: UL 94 - V0; IEC 695-2-1 a 850 °C; IEC 695-2-2
Operational peak temperature: 85 °C
Clamps: nickel plated brass
Screws: galvanized steel
Voltage rating: 450 V
Voltage test: 2500 V
Protection degree: IP 20
Standards
CEI EN 60998-1
CEI EN 60998-2-1
CEI EN 60999
CEI EN 60947-7-1
CEI EN 60998-2-1
CEI EN 60999
CEI EN 60947-7-1
관련된 링크들
- RS PRO Non-Fused Terminal Block, 1-Way, 25mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 12-Way, 25mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 10-Way, 6mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 12-Way, 4mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 10-Way, 4mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 1-Way, 35mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 12-Way, 16mm² Wire Screw
- RS PRO Non-Fused Terminal Block, 2-Way, 10mm², 25 mm² Wire, 101A Screw