SKF 17 Tooth Rough Stock Bore Sprocket, PHS 40-1BH17 40-1

모든 Sprockets 열람하기

Subtotal (1 unit)*

₩12,060.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 05일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩12,060.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-9565
제조사 부품 번호:
PHS 40-1BH17
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Bore Diameter

36.58mm

Product Type

Sprocket

Number of Teeth

17

Bore Type

Rough Stock Bore

Pitch Diameter

12.7mm

Hub Diameter

54.1mm

Material

Steel

Sprocket Width

25.4mm

Maximum Inside Diameter

36.58mm

Acceptable Chain Type

40-1

Outside Diameter

75.69mm

Standards/Approvals

ANSI

COO (Country of Origin):
CN

SKF Sprocket, 17 Teeth, 75.69mm Outside Diameter - PHS 40-1BH17


This sprocket is a steel-hubbed component designed to transmit rotary motion in chain-driven systems, configured with a rough stock bore for on-site machining. It interfaces with a 40-1 roller chain and is intended for industrial power transmission where a hubbed sprocket with a substantial hub diameter is required.

Features and Benefits:


• 17 teeth provide consistent engagement with chain links for steady drive
• ANSI approval ensures compatibility with recognised chain standards
• Steel construction offers structural strength for continuous operation
• Rough stock bore permits customisation to shaft dimensions on site
• 25.4mm width supports lateral load distribution in chain runs

Applications


• Suitable for replacing worn sprockets in 40-1 chain drives
• Used with industrial conveyors requiring hubbed sprockets
• Ideal for retrofit projects needing a rough bore for machining
• Can be used for light-to-moderate power transmission systems
• Used for workshop fabrication where bore adaptation is needed

What bore arrangement allows shaft adaptation?


The component is supplied with a rough stock bore enabling machined finishing to match the shaft diameter precisely.

How does the hub design affect installation?


The hub diameter of 54.1mm provides a solid mounting area for set screws or press-fit arrangements depending on installation practice.

What internal clearance limits should be considered?


The maximum inside diameter is 36.58mm which defines the largest shaft or hub component that can be accommodated before machining.

Which chain type will this engage with?


It is intended for use with 40-1 roller chain, ensuring correct pitch and link engagement.

What dimensional parameter governs sprocket-to-chain spacing?


The pitch diameter of 12.7mm determines the effective sprocket spacing for accurate chain meshing.

관련된 링크들