SKF 37 Tooth Rough Stock Bore Sprocket, PHS 08B-1BH37 08 B-1

모든 Sprockets 열람하기

Subtotal (1 unit)*

₩41,800.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩41,800.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-9161
제조사 부품 번호:
PHS 08B-1BH37
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Number of Teeth

37

Product Type

Sprocket

Bore Diameter

50mm

Bore Type

Rough Stock Bore

Pitch Diameter

149.76mm

Material

Steel

Hub Diameter

90mm

Sprocket Width

35mm

Acceptable Chain Type

08 B-1

Maximum Inside Diameter

50mm

Standards/Approvals

BS, EN

COO (Country of Origin):
CN

SKF Sprocket, 35mm Sprocket Width, 37 Teeth - PHS 08B-1BH37


This sprocket is a toothed drive wheel designed for roller chain power transmission in industrial systems. It is manufactured from steel and conforms to recognised British and European standards, providing compatibility with specified chain forms in mechanical drive assemblies. The component is intended for integration into driven or driving shafts where robust tooth engagement is required.

Features and Benefits:


• 37 teeth provide consistent chain engagement and load distribution
• 149.76mm pitch diameter ensures correct chain pitch alignment
• Rough stock bore allows customised shaft fitting on site
• 35mm width supports higher contact area for improved wear life
• Maximum inside diameter50mm accommodates a range of hub configurations
• 90mm hub diameter offers solid bearing and mounting Interface

Applications


• Suitable for use with 08 B-1 roller chain drives
• Used for power transmission in conveyor systems
• Ideal for retrofitting industrial gear assemblies
• Can be used for drives requiring metric pitch compatibility
• Used with shafts requiring a rough bore finish prior to machining

What chain specification does it match?


It is compatible with 08 B-1 chain for direct meshing and correct pitch engagement.

How is the bore prepared for shaft mounting?


The unit is supplied with a rough stock bore intended for final machining and fitting to the required shaft diameter.

Which material properties affect service life?


The steel construction provides load-bearing strength and resistance to deformation under cyclical chain loads.

What standards does it meet?


It meets specified BS and EN approvals indicating conformity with applicable British and European sprocket standards.

관련된 링크들