INA 17 Tooth Parallel Sprocket, KSR16-L0-10-10-17-09

모든 Sprockets 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩102,648.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량
한팩당
1 - 4₩102,648.00
5 - 9₩98,553.00
10 - 24₩96,505.50
25 +₩94,438.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
194-7231
제조사 부품 번호:
KSR16-L0-10-10-17-09
제조업체:
INA
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

INA

Product Type

Sprocket

Number of Teeth

17

Bore Type

Parallel

Pitch Diameter

9.53mm

Material

Steel

Sprocket Width

18.3mm

Maximum Inside Diameter

16.2mm

Standards/Approvals

No

INA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds

The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required

In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.

관련된 링크들