최근 검색 기록

    RS PRO Butt Splice Connector, Tin 0.5 → 1.5 mm²

    RS 제품 번호:
    433-078
    제조업체:
    RS PRO
    RS PRO
    모든 Splice Connectors 열람하기
    6700 홍콩에 재고-결제 확인후 2-3영업일내 국내 도착
    509200 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each (In a Pack of 100)

    ₩213.90

    수량한팩당한팩당*
    100 - 400₩213.90₩21,312.50
    500 - 2400₩192.20₩19,189.00
    2500 +₩158.10₩15,794.50
    *다른 단위에 대한 가격 표시
    RS 제품 번호:
    433-078
    제조업체:
    RS PRO
    COO (Country of Origin):
    TW

    참조 문서


    제정법과 컴플라이언스

    COO (Country of Origin):
    TW

    제품 세부 사항

    Butt


    RS PRO selection of butt connectors designed for crimping electrical wire and suit cables from 0·5mm² to 1·5mm² and 1·0mm² to 2·5mm². These terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another and are ideal for repairing, changing and lengthening electrical circuits making them a great addition to any electrician's tool kit.

    Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level. Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


    Options include:
    433-078 - Butt Splice Connector, 0.5 to 1.5 mm²
    208-2688 - Sheet formed butt pin terminal, Butt Splice Connector, 1 to 2.5 mm²

    For basic plier action tool, see stock no. 534-806

    RS PRO have a great range of insulated and non-insulated crimp butt splice terminals which are easy to terminate and are suitable for various applications.

    Features:


    Uninsulated
    Contact material is copper
    Contact plating is tin

    Typical Applications:


    Butt splice crimp terminals are used in a wide range of industrial, commercial and domestic applications. They can be found almost anywhere where an electrical connection is required. Some of the most common are

    • Industrial control systems
    • Automotive and transportation sector
    • Machine building
    • Electrical and electronic equipment
    • Commercial and domestic appliances

    FAQs
    Is there a crimp tool that you can use for crimping the butt connectors?
    Any good quality ratchet style crimp tool or plier tool designed for butt terminals would suffice. RS PRO offers a range of reliable, cost-effective tools. See typical part number 534-806.

    What is the difference between un-insulated and insulated crimp tools?
    Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

    Why RS PRO?
    RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.


    Sheet Formed Terminals


    Suit cables from 0·5mm² to 1·5mm² and 1·0mm² to 2·5mm²,For ratchet action tool, see stock no. 252-7658,For basic plier action tool, see stock no. 534-806

    사양

    속성
    Splice TypeButt
    Wire Size0.5 → 1.5 mm²
    Minimum Wire Size mm²0.5mm²
    Overall Length15mm
    Maximum Wire Size mm²1.5mm²
    Diameter1.8mm
    InsulationUninsulated
    Contact MaterialCopper
    Contact PlatingTin
    6700 홍콩에 재고-결제 확인후 2-3영업일내 국내 도착
    509200 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each (In a Pack of 100)

    ₩213.90

    수량한팩당한팩당*
    100 - 400₩213.90₩21,312.50
    500 - 2400₩192.20₩19,189.00
    2500 +₩158.10₩15,794.50
    *다른 단위에 대한 가격 표시