Visaton, 8 Ω Rectangular, 10W
- RS 제품 번호:
- 719-1954
- Distrelec 제품 번호:
- 130-40-635
- 제조사 부품 번호:
- EX 45 S
- 제조업체:
- Visaton
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩52,414.40
재고있음
- 183 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩52,414.40 |
| 10 - 24 | ₩50,308.80 |
| 25 + | ₩48,203.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 719-1954
- Distrelec 제품 번호:
- 130-40-635
- 제조사 부품 번호:
- EX 45 S
- 제조업체:
- Visaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Visaton | |
| Product Type | Audio Exciter | |
| Impedance | 8Ω | |
| Output Power | 10W | |
| Driver Shape | Rectangular | |
| Standards/Approvals | DIN EN 60268-5 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Visaton | ||
Product Type Audio Exciter | ||
Impedance 8Ω | ||
Output Power 10W | ||
Driver Shape Rectangular | ||
Standards/Approvals DIN EN 60268-5 | ||
- COO (Country of Origin):
- CN
Electrodynamic Exciter Drivers
Visaton Exciters are designed to convert a flat panel into a loudspeaker instead of fitting a conventional loudspeaker. Panels of many different materials and sizes can be used such as plywood, polystyrene ceiling tiles and plexiglass. Exciters provide an invisible sound source which is also proof against external influences (water, dust, sharp objects). Sound quality can be very good and their non directional sound production means that positioning in a room is not so important as with conventional speakers. Exciters are easy to install and do not require holes cutting to accommodate them.
Exciters are a new and innovative type of speaker. They are electromagnetic devices which connect to an ordinary audio amplifier in the conventional way by means of loudspeaker cable. Once fixed in place to the rear of a panel, the audio signal causes the exciter unit to vibrate which in turn makes the panel to which it is fixed vibrate and create sound.
The quality of the reproduced sound is very much dependent on the type of surface the exciter is attached to. The sound will generally be better with larger panels which are light and rigid. Measurements such as frequency response and sound pressure level will depend on the surface material. Ideally the exciter should be fitted slightly off centre on the panel and should be firmly attached by means of gluing and/or screwing.
Moving Coil Exciters
관련된 링크들
- TE Connectivity TLRS 2 mΩ, 1575 Metal Strip Surface Mount Resistor ±1 % 5 W - TLRS157550ER002FTDG
- TE Connectivity TLRS 2 mΩ, 1050 Metal Strip Surface Mount Resistor ±1 % 4 W - TLRS105030DR002FTDG
- TE Connectivity TLRS 4 mΩ, 1050 Metal Strip Surface Mount Resistor ±1 % 3 W - TLRS105030DR004FTDG
- TE Connectivity TLRS 1 mΩ, 1206 Metal Strip Surface Mount Resistor ±1 % Surface 3 W - TLRS105030DR001FTDG
- TE Connectivity TLR 2 mΩ, 2512 Metal Strip Surface Mount Resistor ±1 % 3 W - TLR3A30DR002FTDG
- TE Connectivity TLR 2 mΩ, 2512 Metal Strip Surface Mount Resistor ±1 % 2 W - TLR3A20DR002FTDG
- TE Connectivity TLR 500 Ω, 2512 Metal Strip Surface Mount Resistor ±1 % Surface 2 W - TLR3A20DR0005FTDG
- TE Connectivity TLA3A 5 mΩ, 2512 Metal Strip Surface Mount Resistor ±1 % Surface 1 W - TL3AR005FTDG
