Sensata / Crydom DRC Series Solid State Relay, 7.6 A Load, DIN Rail Mount, 140V ac Control

모든 Solid State Relays 열람하기

Subtotal (1 unit)*

₩353,703.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 7 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩353,703.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
822-9375
제조사 부품 번호:
DRC3R48B420
제조업체:
Sensata / Crydom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sensata / Crydom

Maximum Load Current

7.6A

Product Type

Solid State Relay

Mount Type

DIN Rail

Minimum Load Voltage

48V ac

Maximum Control Voltage

140V ac

Minimum Control Voltage

90V ac

Series

DRC

Terminal Type

Screw

Contact Configuration

2 NO

IP Rating

IP20

Minimum Operating Temperature

-30°C

Switching Function

Zero Voltage Turn On

Maximum Operating Temperature

80°C

Length

45.31mm

Width

95.6 mm

Standards/Approvals

C-UL-US Listed, IEC Rated, CE & RoHS Compliant,UL Listed, IEC60947-2,CCC,EMC,IEC 61000-4-2,IEC 61000-4-4,IEC 61000-4-5,IEC 60068-2-6,IEC 60068-2-27

Off State Leakage Current

5.5mArms

COO (Country of Origin):
MX

Crydom DRC Series Solid State Contactors


Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.

DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).

DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch

instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.

This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.

7.6 Amp Motor Controller rated Solid State Contactor

Load voltage range up to 530 VAC

Fits standard 35 mm DIN rail

LED input status indicator

AC or DC control

Zero crossing (resistive loads) or instantaneous turn-on (inductive loads) output

Built in Overvoltage Protection

Ultra-efficient thermal management design (Patented)

C-UL-US Listed, IEC Rated, CE & RoHS Compliant, Horsepower Rated

Embedded auxiliary contacts

DRC3R has reversing control (DRC3R includes On/Off and Forward/Reverse control in a compact 45 mm package)

Output terminals designed for an easy connection to multiple motor connections in parallel for a total up to 5 HP @ 480 Vac

Very low input control current

UL Listed, IEC60947-2 standard package

Solid State Contactors


Note

The reversing option has dual control inputs.

관련된 링크들