Siemens 3RF2 Series Solid State Relay, 20 A Load, DIN Rail Mount, 460 V ac Load, 230V ac Control

RS 제품 번호:: 758-6914
Distrelec 제품 번호:: 304-09-105
제조사 부품 번호:: 3RF2320-1AA24
제조업체:: Siemens

Siemens 3RF2 Series Solid State Relay, 20 A Load, DIN Rail Mount, 460 V ac Load, 230V ac Control

Subtotal (1 unit)*

₩347,880.00

3 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩347,880.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 758-6914
Distrelec 제품 번호:: 304-09-105
제조사 부품 번호:: 3RF2320-1AA24
제조업체:: Siemens

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Siemens
	Maximum Load Current	20A
	Product Type	Solid State Relay
	Mount Type	DIN Rail
	Maximum Load Voltage	460V ac
	Minimum Load Voltage	48V ac
	Maximum Control Voltage	230V ac
	Minimum Control Voltage	110V ac
	Series	3RF2
	Terminal Type	Screw
	Contact Configuration	SPST
	IP Rating	IP20
	Minimum Operating Temperature	-25°C
	Switching Function	Zero Cross Switching
	Maximum Operating Temperature	60°C
	Width	100mm
	Length	100mm
	Height	140.5mm
	Standards/Approvals	UL, RoHS, C-Tick, EAC, CE, CSA
	Off State Leakage Current	10mA
	Output Type	Thyristor

	모두 선택
	브랜드 Siemens
	Maximum Load Current 20A
	Product Type Solid State Relay
	Mount Type DIN Rail
	Maximum Load Voltage 460V ac
	Minimum Load Voltage 48V ac
	Maximum Control Voltage 230V ac
	Minimum Control Voltage 110V ac
	Series 3RF2
	Terminal Type Screw
	Contact Configuration SPST
	IP Rating IP20
	Minimum Operating Temperature -25°C
	Switching Function Zero Cross Switching
	Maximum Operating Temperature 60°C
	Width 100mm
	Length 100mm
	Height 140.5mm
	Standards/Approvals UL, RoHS, C-Tick, EAC, CE, CSA
	Off State Leakage Current 10mA
	Output Type Thyristor

COO (Country of Origin):: DE

Siemens 3RF2 Series Solid State Contactor, 20A Maximum Load Current, 48 to 460V Load Voltage - 3RF2320-1AA24

This solid state contactor is a single-pole switching device intended for AC load control in industrial environments. It operates with an AC load range of 48 to 460V and accepts an AC control supply of 110 to 230V at 50 to 60Hz. Designed for Snap-on mounting on a 35mm DIN rail, it provides zero-cross switching to reduce electrical stress and is rated to IP20 protection.

Features and Benefits:

• 20A operational current for controlling moderate AC loads
• Zero-cross switching reduces inrush and electromagnetic emissions
• 10mA off-state leakage for lower standby current
• 110 to 230V control voltage minimises Interface complexity
• 600V insulation rating supports higher system voltages

Applications

• Used with motor soft-start systems requiring reduced surge
• Suitable for switching lighting banks
• Can be used for machine tool control panels with DIN-rail mounting
• Ideal for process control where low leakage is required

What control frequency does it accept?

It accepts control supply frequencies of 50Hz and 60Hz.

How is the unit mounted in panels?

It fits on a standard 35mm mounting rail and can be screw-fixed for additional retention.

What conductor sizes can be connected to the main terminals?

Main contacts accept solid or stranded conductors from 1.5 to 6mm² and finely stranded with end processing up to 10mm².

How does ambient temperature affect operation limits?

The device operates between -25°C and +60°C and derates above 40°C.

What transient immunity is provided against surges?

Main-circuit surge resistance is rated to 6kV with specified conducted and radiated immunity in accordance with IEC standards.

Note

Temperature can affect current rating; please consult the data sheet for potential derating.