Omron G3DZ Series Solid State Relay, 0.6 A Load, PCB Mount, 264 V ac Load, 5 V dc Control

모든 Solid State Relays 열람하기

Subtotal (1 unit)*

₩48,391.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 84 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩48,391.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
365-0620
제조사 부품 번호:
G3DZ-2R6PL DC5
제조업체:
Omron
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Omron

Maximum Load Current

0.6 A

Mounting Type

PCB Mount

Maximum Load Voltage

264 V ac

Minimum Load Voltage

20 V dc

Maximum Control Voltage

5 V dc

Control Voltage Range

4 → 6 V dc

Minimum Load Current

100 μA

Terminal Type

Through Hole

Contact Configuration

SPST

Output Device

MOSFET

Maximum Turn On Time

6 ms

Series

G3DZ

Load Voltage Range

3 → 125 V dc, 3 → 264 V ac

Dimensions

18.5 x 6.5 x 12.5mm

Length

18.5mm

Minimum Operating Temperature

-30°C

Depth

6.5mm

Height

12.5mm

Off State Leakage Current

10 μA

Operating Temperature Range

-30 → +85°C

Maximum Operating Temperature

+85°C

G3DZ SSR


These PCB mount MOSFET power relays have a maximum switching current of 0.6A and are suitable for switching full and half wave alternating currents.

SSR identical in size to the G6D series (stk no 512-9320 etc) with a max. ac/dc switching current of 0.6A
Suitable for switching full and half-wave alternating current
10μA maximum output leakage current
Output ON resistance: 2.4Ω
2500Vac dielectric strength between input and output
Input resistor and varistor incorporated
Single Phase connection line to neutral
See stk no 376-717 for a suitable PCB socket
Operating temperature range -30 to +85°C

Omron G3DZ-2R6PL-DC5 MOFSET PCB Mount Power Solid State Relay.


The G3DZ solid State relay is the same size as the G6D with a 0.6 A maximum AC/DC current.

• Switching 0.6 A at 240 V ac or 100 V dc.
• 10μA maximum current leakage (between open terminals).
• With an input resistor
• Overvoltage absorption circuit (AC/DC models only).
• Full and half wave rectified. AC current switchable.
• PCB Mount
• MOSFET
• With input resistance.
• Standard models available with UL and CSA certification.
• RoHS Compliant.

Features and Benefits of the MOSFET PCB Mount Solid State Relay.


• Isolation Photo-voltage coupler.
• No zero cross function.
• No indicators.
• Rated output load 0.6 A, 5 to 240 v ac, 5 to 100 V dc.
• Rated input voltage 5 V dc
• Operating voltage 4 to 6 V dc
• Must release voltage 1 V dc min.
• Impedance 830 Ω +20%
• Must operate voltage 4 V dc maximum.
• Rated load voltage 5 to 240 V ac, 5 to 100 V dc.
• Load voltage range 3 to 264 V ac, 3 to 125 V dc.
• Load current AC = 100 μ to 0.6 A, DC = 10 μ to 0.6 A.
• Inrush current 6 A (10 ms).

G3DZ-2R6PL-DC5 MOFSET PCB Mount Solid State Relay Added Features.


• Operate time 6 ms max.
• Release time 10 ms max.
• Output ON-resistance 2.4 Ω max.
• OFF State leakage 10 μ max (125 V dc), 100 μ max (200 V ac).
• Vibration resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude).
• Shock resistance 1000 m/s².
• Weight 3.1 g approx.

Safety Notes.


• Do not clean or solder the PCB when the Solid State Relay is in the socket.
• Reverse surge voltage – If this is put on the input terminals insert a diode parallel to the input terminal. DO NOT impose a reversed voltage of more than 3 V.
• Terminal material has a high heat induction so any automatic or manual soldering should be achieved with 10 seconds at 260°C.
• Always when fitting a socket ensure it is matched correctly and insert pushing vertically (pressure straight down).

Suitable Isolation Socket.


• Part number P6D-04P. Stock number 376717.

관련된 링크들