Sensata Crydom CMX Series Solid State Relay, 10 A rms Load, PCB Mount, 60 V dc Load, 10 V dc Control

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩68,206.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 1,715 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 24₩68,206.40
25 - 99₩66,796.40
100 +₩64,728.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
244-8993
Distrelec 제품 번호:
137-41-201
제조사 부품 번호:
CMX60D10
제조업체:
Sensata / Crydom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sensata / Crydom

Maximum Load Current

10 A rms

Mounting Type

PCB Mount

Maximum Load Voltage

60 V dc

Minimum Load Voltage

1 V dc

Minimum Control Voltage

3 V dc

Maximum Control Voltage

10 V dc

Switching Type

DC

Control Voltage Range

3 → 10 V dc

Range

Crydom

Minimum Load Current

0 A

Terminal Type

PCB Pin

Output Device

MOSFET

Relay Type

Solid State Relay

Series

CMX

Load Voltage Range

0 → 60V dc

Maximum Turn On Time

1 ms

Dimensions

43.1 x 7.6 x 25.4mm

Maximum Operating Temperature

+80°C

Minimum Operating Temperature

-30°C

Operating Temperature Range

-30 → +80°C

Length

43.1mm

Off State Leakage Current

0.1 mA

Depth

7.6mm

Height

25.4mm

Standards Met

CE, RoHS Compliant

COO (Country of Origin):
MX

Sensata | Crydom Solid-State Relay, 0 to 60V DC Load Voltage Range, PCB Mounting - CMX Series - CMX60D10


Turn your circuit on and off using this solid-state relay from Sensata | Crydom. When it receives a control signal, it flashes it across an internal transistor, sending power to the circuit. As it has no moving parts, there's less risk of wear and tear, so it lasts for the long haul. This SSR is fully encapsulated in a thermally conductive epoxy case that dissipates heat, helping it to keep its cool in harsh conditions. You'll typically find this piece of gear in your robotics and data acquisition systems.

Features & Benefits


• Load voltage range between 0 and 60V DC for use in low and high-power equipment
• Safe for use in harsh conditions, thanks to a wide operating temperature range between -10°C and +80°C

How do I mount this SSR?


Thanks to its built-in PCB pins, you can mount this SSR in a flash by soldering it to your board.

What's the switching time of this relay?


It has a rapid turn-on time of 1ms and a turn-off time of 300μs, so it switches power to your circuit in a jiffy.

Approvals

UL

관련된 링크들