Broadcom ASSR-5211 Series Solid State Relay, 0.4 A Load, Surface Mount, 600 V Load, 0.8 V Control

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Solid State Relays 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 50 units)*

₩283,316.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 900 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tube*
50 - 50₩5,666.32₩283,353.60
100 - 200₩5,525.32₩276,266.00
250 - 450₩5,388.08₩269,366.40
500 - 950₩5,226.40₩261,282.40
1000 +₩5,068.48₩253,442.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
189-4790
제조사 부품 번호:
ASSR-5211-001E
제조업체:
Broadcom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Broadcom

Maximum Load Current

0.4 A

Mounting Type

Surface Mount

Maximum Load Voltage

600 V

Minimum Load Voltage

600 V

Maximum Control Voltage

0.8 V

Switching Type

AC/DC, DC Only

Terminal Type

6 Pin

Contact Configuration

SPST

Output Device

MOSFET

Package Style

DIP

Series

ASSR-5211

Maximum Turn On Time

5ms

Load Voltage Range

-600 → +600V

Dimensions

9.9 x 6.6 x 3.68mm

Operating Temperature Range

-40 → +85°C

Depth

6.6mm

Length

9.9mm

Maximum Operating Temperature

+85°C

Off State Leakage Current

1 μA

Minimum Operating Temperature

-40°C

Special Features

High-Speed Photovoltaic Diode Array

Capacitance

0.8pF

Height

3.7mm

High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16Ω)


The ASSR-5211 Solid State Relay (SSR) is specifically designed for high current applications, commonly found in the industrial equipments.The relay is a solid-state replacement for single-pole, normally-open, (1 Form A) electromechanical relays.

The ASSR-5211 consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.

The ASSR-5211 connection A, as shown in the schematic, allows the relay to switch either ac or dc loads. The connection B, with its advantages of reduced on-resistance and higher output current, allows the relays to switch dc loads only.

The electrical and switching characteristics are specified over the temperature range of -40°C to +85°C.

ASSR-5211, High Current, 1 Form A, Solid State Relay (MOSFET), 600V/0.2A/16Ohm)


Features


  • Compact Solid-State Bi-directional Signal Switch

  • Single Channel Normally-off

  • Single-Pole-Single-Throw (SPST) Relay

  • 600V Output Withstand Voltage

  • 0.2A or 0.4A Current Rating

  • Low On-Resistance: 4Ω Typical for DC-only, 16Ω Typical for AC/DC

  • High Speed Switching: 0.7ms (Ton), 0.07ms (Toff) Typical

  • High Transient Immunity: >1kV/μs

  • High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals)

3750 Vrms for 1 min per UL1577

CSA Component Acceptance

Applications


  • Industrial Controls

  • Factory Automation

  • Data Acquisition

  • Measuring Instrument

  • Medical System

  • Security System

  • EMR / Reed Relay Replacement

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



Optocouplers, Avago Technologies

관련된 링크들