Celduc Solid State Relay, 40 A Load, DIN Rail Mount, 265 Vrms Load, 5V Control
- RS 제품 번호:
- 172-0525
- 제조사 부품 번호:
- SG444420
- 제조업체:
- Celduc
Subtotal (1 unit)*
₩466,559.60
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩466,559.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 172-0525
- 제조사 부품 번호:
- SG444420
- 제조업체:
- Celduc
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Celduc | |
| Maximum Load Current | 40A | |
| Product Type | Solid State Relay | |
| Mount Type | DIN Rail | |
| Maximum Load Voltage | 265Vrms | |
| Minimum Load Voltage | 115V ac | |
| Minimum Control Voltage | 3V | |
| Maximum Control Voltage | 5V | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Contact Configuration | SPST | |
| Switching Function | Zero Cross Switching | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 80°C | |
| Width | 35 mm | |
| Height | 32mm | |
| Standards/Approvals | CE, EAC | |
| Length | 60mm | |
| Output Type | Thyristor | |
| 모두 선택 | ||
|---|---|---|
브랜드 Celduc | ||
Maximum Load Current 40A | ||
Product Type Solid State Relay | ||
Mount Type DIN Rail | ||
Maximum Load Voltage 265Vrms | ||
Minimum Load Voltage 115V ac | ||
Minimum Control Voltage 3V | ||
Maximum Control Voltage 5V | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Contact Configuration SPST | ||
Switching Function Zero Cross Switching | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 80°C | ||
Width 35 mm | ||
Height 32mm | ||
Standards/Approvals CE, EAC | ||
Length 60mm | ||
Output Type Thyristor | ||
제외
- COO (Country of Origin):
- FR
Phase Angle and Frequency Burst Regulators
SG5 relays with proportional control have an analogue input isolated from the mains allowing a proportional variation of the operating duty cycle at this input through the generation of frequency bursts.
Applications: heating regulation.- Ve = 0 V → t/T = 0%
- Ve = 5 V → t/T = 50%
- Ve = 10 V → t/T = 100%.
The SG4 models have an analogue input isolated from the mains allowing a proportional variation at this input of the switching instant on the sine wave.
Applications: motor speed variation, dimmable lighting.
Specific documentation available on request.
Proportional and Power
Note
Temperature can affect current rating; please consult the data sheet for potential derating.
관련된 링크들
- Celduc SG4 Series Solid State Relay, 40 A Load, DIN Rail Mount, 265 Vrms Load, 10V dc Control
- Celduc SO8 Series Solid State Relay, 25 A Load, DIN Rail Mount, 275 Vrms Load, 265V Control
- Celduc SO8 Series Solid State Relay, 90 A Load, DIN Rail Mount, 510 Vrms Load, 265V Control
- Celduc SO8 Series Solid State Relay, 95 A Load, DIN Rail Mount, 510 Vrms Load, 265V Control
- Celduc SO8 Series Solid State Relay, 40 A Load, DIN Rail Mount, 275 Vrms Load, 265V Control
- Celduc SO8 Series Solid State Relay, 60 A Load, DIN Rail Mount, 510 Vrms Load, 265V Control
- Celduc SG4 Series Solid State Relay, 40 A Load, Panel Mount, 460 Vrms Load, 10V dc Control
- Celduc SO Series Solid State Relay, 50 A Load, 480 Vrms Load, 30V dc Control