제조사부품번호

Omron G3VM Series PCB Mount Solid State Relays, 200 mA Load, Surface Mount Mount, 80 V Load

RS 제품 번호:: 685-253
제조사 부품 번호:: G3VM1139M
제조업체:: Omron

Omron G3VM Series PCB Mount Solid State Relays, 200 mA Load, Surface Mount Mount, 80 V Load

현재 이용 불가

이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.

RS 제품 번호:: 685-253
제조사 부품 번호:: G3VM1139M
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	PCB Mount Solid State Relays
	Maximum Load Current	200mA
	Mount Type	Surface Mount
	Maximum Load Voltage	80V
	Series	G3VM
	Terminal Type	Surface Mount
	Contact Configuration	1a (SPST-NO)
	Minimum Operating Temperature	-20°C
	On State Resistance	1Ω
	Package Type	4-Pin SOP
	Maximum Operating Temperature	85°C
	Width	4.4mm
	Standards/Approvals	UL
	Length	2.54mm
	Height	3.9mm
	Output Type	FET
	Capacitance	15pF
	Off State Leakage Current	1nA

	모두 선택
	브랜드 Omron
	Product Type PCB Mount Solid State Relays
	Maximum Load Current 200mA
	Mount Type Surface Mount
	Maximum Load Voltage 80V
	Series G3VM
	Terminal Type Surface Mount
	Contact Configuration 1a (SPST-NO)
	Minimum Operating Temperature -20°C
	On State Resistance 1Ω
	Package Type 4-Pin SOP
	Maximum Operating Temperature 85°C
	Width 4.4mm
	Standards/Approvals UL
	Length 2.54mm
	Height 3.9mm
	Output Type FET
	Capacitance 15pF
	Off State Leakage Current 1nA

Datasheet - G3VM1139M

COO (Country of Origin):: JP

Omron G3VM Series PCB Mount Solid State Relays, 200mA Maximum Load Current, 80V Maximum Load Voltage - G3VM1139M

This PCB-mount solid-state relay provides a compact, surface-mounted switching solution for low-current DC circuits in industrial and electronic control environments. Designed for printed circuit board assembly, it uses a semiconductor output stage to perform single-pole single-throw normally open switching with minimal mechanical wear, making it suitable for frequent switching in automated systems.

Features and Benefits:

• 80V maximum load voltage enables moderate-voltage DC switching
• 200 mA maximum load current supports low-power control circuits
• 1 nA off-state leakage reduces unintended current draw
• 1 Ω on-state resistance minimises voltage drop during conduction
• 15 pF capacitance limits noise and crosstalk between terminals
• UL approval confirms recognised safety assessment for use

Applications

• Suitable for signal switching in factory automation controllers
• Ideal for interfacing sensors to control electronics
• Used for low-current power distribution in instrumentation
• Can be used for PCB-mounted relay replacement in Compact devices
• Used with driver ICs in industrial monitoring modules

What mounting method is required for PCB assembly?

The device uses a surface-mount Terminal style in a 4-pin SOP package for reflow soldering on standard pads.

How does the thermal environment affect operation?

Rated to operate between -20 °C and 85 °C, it maintains switching characteristics across typical industrial temperature ranges.

What type of semiconductor is used for the output?

The output stage employs a FET topology to provide solid-state conduction and fast switching performance.

How small is the component footprint for dense boards?

The package measures 2.54mm by 4.4mm with a height of 3.9 mm, allowing tight placement on populated PCBs.