Omron G3RV-ST Solid State Interface Relay, Control:12V dc DIN Rail Screw

본 제품군 열람하기

Subtotal (1 unit)*

₩95,277.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 9월 01일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩95,277.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
271-1885
제조사 부품 번호:
G3RV-ST700-A 12VDC
제조업체:
Omron
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Omron

Maximum Control Voltage

12V dc

COO (Country of Origin):
JP

Omron G3RV-ST Series Solid State Interface Relay, 2500V Isolation Voltage, 12VDC Input Voltage - G3RV-ST700-A 12VDC


This solid-state Interface relay provides Compact electrical isolation and switching for automation systems, enabling clean interfacing between PLC outputs and power circuits. Designed for DIN-rail mounting, it suits control panels where space is limited and consistent input signalling is required. An LED indicates input status to assist commissioning and diagnostics.

Features and Benefits:


• Isolation voltage 2500V for safer control-to-load separation • 12V DC input requiring only 15 mA for low-drive demands • Rise time 11 MS to limit inrush and reduce contact stress • Screw-terminal configuration for secure wiring connections • Wide ambient range -30°C to 55°C for varied site conditions • Standards approvals EN 62314, UL508, IEC 60529, CSA C22.2 No.14 supporting industrial use

Applications


• Suitable for PLC output isolation and signal conditioning in control cabinets • Ideal for retrofit of relay panels requiring DIN-rail solid-state relay 6.2mm screw-terminal footprint • Used with motor starter logic to provide noise-resistant switching • Can be used for indicator and alarm circuit interfacing with LED feedback

What mounting method is provided for panel installation?


It attaches to a DIN rail, enabling fast installation and straightforward replacement during maintenance.

How is input status verified on-site?


An integrated LED displays input activation, allowing Visual confirmation without test equipment.

How does it perform in electrically noisy environments?


The device offers 2500V isolation between control and load, helping to prevent interference propagation.

Which wiring approach is required for secure connections?


Terminals use screw-type clamps to ensure firm conductor retention suitable for industrial cabling.

What approvals indicate suitability for industrial applications?


It meets EN 62314, UL508, IEC 60529 and CSA C22.2 No.14 standards for relevant industrial requirements.

관련된 링크들