Metcal SxP 1 mm Chisel 9.2 mm Soldering Iron Tip for use with MFR-H1-SC2
- RS 제품 번호:
- 612-4348
- Distrelec 제품 번호:
- 182-01-402
- 제조사 부품 번호:
- SFP-CH10
- 제조업체:
- Metcal
Subtotal (1 unit)*
₩44,800.00
재고있음
- 59 개 단위 배송 준비 완료
- 추가로 2026년 10월 28일 부터 62 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩44,800.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 612-4348
- Distrelec 제품 번호:
- 182-01-402
- 제조사 부품 번호:
- SFP-CH10
- 제조업체:
- Metcal
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Metcal | |
| Model Number | SxP | |
| Product Type | Soldering Iron Tip | |
| Tip Shape | Chisel | |
| For Use With | MFR-H1-SC2 | |
| Tip Series | SFP | |
| Tip Angle | 30° | |
| Tip Width | 1 mm | |
| Tip Length | 9.2mm | |
| Standards/Approvals | RoHS | |
| 모두 선택 | ||
|---|---|---|
브랜드 Metcal | ||
Model Number SxP | ||
Product Type Soldering Iron Tip | ||
Tip Shape Chisel | ||
For Use With MFR-H1-SC2 | ||
Tip Series SFP | ||
Tip Angle 30° | ||
Tip Width 1 mm | ||
Tip Length 9.2mm | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- US
Metcal Soldering Iron Tip, 1mm Tip Width, 9.2mm Tip Length - SFP-CH10
This soldering iron tip is designed for precision soldering tasks in electronics workflows, providing a chisel-shaped contact point for controlled heat transfer. It is intended to fit compatible handheld soldering tools and supports work that requires accurate solder deposition and joint formation in small-scale assemblies.
Features and Benefits:
• Chisel profile delivers broad contact and accurate solder flow
• 30° angle allows access to confined component areas
• 1mm width enables fine-detail soldering on small pads
• 9.2mm tip length improves reach into recessed locations
• RoHS conformity supports use in lead-free environments
• 30° angle allows access to confined component areas
• 1mm width enables fine-detail soldering on small pads
• 9.2mm tip length improves reach into recessed locations
• RoHS conformity supports use in lead-free environments
Applications
• Suitable for delicate surface-mount component work
• Ideal for tight-angle soldering on Compact assemblies
• Used with compatible handheld irons for repair tasks
• Can be used for precision through-hole soldering operations
• Used for controlled rework of small electronic joints
• Ideal for tight-angle soldering on Compact assemblies
• Used with compatible handheld irons for repair tasks
• Can be used for precision through-hole soldering operations
• Used for controlled rework of small electronic joints
What compatibility should I check before fitting it?
Confirm the heater assembly accepts the specified compatible tool Interface to ensure correct seating and heat transfer.
How does the tip geometry affect thermal contact?
The chisel face provides a larger mating area than a conical tip, which stabilises solder transfer on flat leads.
What maintenance practice preserves tip life?
Regular tinning after cleaning prevents oxidation build-up and maintains effective heat conduction.
How does the angle influence access in crowded boards?
A shallow 30° bevel permits approach under adjacent components where vertical tips cannot reach.
관련된 링크들
- Metcal SxP 3 mm Chisel 11 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 2 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 5 mm Chisel 7.6 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 2.5 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 1.5 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 2 mm Chisel 16.04 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 3.5 mm Chisel 11 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 1 mm Chisel 9.2 mm Soldering Iron Tip for use with MFR-H1-SC2