Weller LHT E 6.7 mm Screwdriver 25 mm Soldering Iron Tip for use with WSP 150
- RS 제품 번호:
- 361-0868
- Distrelec 제품 번호:
- 304-00-015
- 제조사 부품 번호:
- T0054445199
- 제조업체:
- Weller
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩26,340.00
재고있음
- 587 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 24 | ₩26,340.00 |
| 25 - 49 | ₩25,560.00 |
| 50 + | ₩25,040.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 361-0868
- Distrelec 제품 번호:
- 304-00-015
- 제조사 부품 번호:
- T0054445199
- 제조업체:
- Weller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller | |
| Tip Shape | Screwdriver | |
| Model Number | LHT E | |
| Product Type | Soldering Iron Tip | |
| For Use With | WSP 150 | |
| Tip Series | LHT | |
| Tip Width | 6.7 mm | |
| Tip Length | 25mm | |
| Standards/Approvals | UPC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller | ||
Tip Shape Screwdriver | ||
Model Number LHT E | ||
Product Type Soldering Iron Tip | ||
For Use With WSP 150 | ||
Tip Series LHT | ||
Tip Width 6.7 mm | ||
Tip Length 25mm | ||
Standards/Approvals UPC | ||
Weller Soldering Iron Tip, 25mm Tip Length, 6.7mm Tip Width - T0054445199
This soldering iron tip is a replacement accessory designed for use with a compatible handheld station, providing a shaped working end for heat transfer in assembly and repair tasks. It is intended for tasks requiring a flat, broad contact edge and is suitable where a durable screwdriver-style tip is needed for soldering components.
Features and Benefits:
• Screwdriver-shaped end for improved joint contact and heat spread
• UPC-approved component for standardised acceptance in systems
• Short thermal mass for controlled heating response
• Robust construction supporting repeated solder cycles
• Compatible geometry for secure fit with matching holders
• UPC-approved component for standardised acceptance in systems
• Short thermal mass for controlled heating response
• Robust construction supporting repeated solder cycles
• Compatible geometry for secure fit with matching holders
Applications
• Suitable for repair of mechanical connector joints
• Ideal for soldering larger through‑hole components
• Used with a specific handpiece requiring screwdriver tips
• Can be used for desoldering tasks needing broad contact
• Appropriate for workshop maintenance of electronic assemblies
• Ideal for soldering larger through‑hole components
• Used with a specific handpiece requiring screwdriver tips
• Can be used for desoldering tasks needing broad contact
• Appropriate for workshop maintenance of electronic assemblies
What length of working end does it provide?
The working end extends 25mm from the mounting face to the tip edge, giving a defined reach for accessing recessed joints.
What is the tip width and how does that affect heat transfer?
The contact face measures 6.7mm across, increasing surface area to distribute heat over larger solder pads and reduce local overheating.
Which handpiece fittings is it intended to mate with?
It is manufactured to match the mechanical interface of a specific hot‑air and iron combination designed for this tip shape, ensuring correct seating and alignment.
Is this tip intended for general electronics or heavier tasks?
The shaped contact and dimensions are suited to heavier contact areas and component leads where broader heat application is required.
관련된 링크들
- Weller LHT DX 5 mm Bent Screwdriver Soldering Iron Tip for use with WSP 150
- Weller LHT EX 7 mm Bent Screwdriver Soldering Iron Tip for use with WSP 150
- Weller LHT D 4.7 mm Screwdriver 25 mm Soldering Iron Tip for use with WSP 150
- Weller LHT F 9.3 mm Screwdriver 0.9 in Soldering Iron Tip for use with WSP 150
- Weller LHT C 3.2 mm Screwdriver 0.9 in Soldering Iron Tip for use with WSP 150
- Weller LHT FX 9 mm Bent Screwdriver 9.2 mm Soldering Iron Tip for use with WSP 150
- Weller LHT D45 5 mm Bevel Soldering Iron Tip for use with WSP 150
- Weller LT ALX 1.6 mm Bent Screwdriver 17.5 mm Soldering Iron Tip for use with WXP 80, WSP 80, WP 80
