Weller ET GW 3 mm Gull Wing 35 mm Soldering Iron Tip for use with WEP70, LR21 (old generation), LR20
- RS 제품 번호:
- 291-1592
- Distrelec 제품 번호:
- 304-11-585
- 제조사 부품 번호:
- T0054104599
- 제조업체:
- Weller
Subtotal (1 unit)*
₩33,060.00
재고있음
- 141 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩33,060.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 291-1592
- Distrelec 제품 번호:
- 304-11-585
- 제조사 부품 번호:
- T0054104599
- 제조업체:
- Weller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller | |
| Tip Shape | Gull Wing | |
| Model Number | ET GW | |
| Product Type | Soldering Iron Tip | |
| For Use With | WEP70, LR21 (old generation), LR20 | |
| Tip Series | ET | |
| Tip Width | 3 mm | |
| Tip Length | 35mm | |
| Standards/Approvals | UPC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller | ||
Tip Shape Gull Wing | ||
Model Number ET GW | ||
Product Type Soldering Iron Tip | ||
For Use With WEP70, LR21 (old generation), LR20 | ||
Tip Series ET | ||
Tip Width 3 mm | ||
Tip Length 35mm | ||
Standards/Approvals UPC | ||
- COO (Country of Origin):
- BA
Weller Soldering Iron Tip, 35mm Tip Length, 3mm Tip Width - T0054104599
This soldering iron tip is a gull-wing shaped replacement designed for precision soldering of small components. It is intended for use with compatible soldering stations and offers a specific form factor suited to surface-mount and fine-detail tasks. The tip conforms to an industry approval standard and is available in a defined width and length to match the thermal and access requirements of tight assemblies.
Features and Benefits:
• Narrow 3mm profile improves access to tight pad gaps
• 35mm length provides extended reach for recessed joints
• Gull-wing geometry supports controlled solder deposition
• Compatible tips maintain stable heat transfer for SMD work
• Conforms to UPC approval for standardised quality indication
• 35mm length provides extended reach for recessed joints
• Gull-wing geometry supports controlled solder deposition
• Compatible tips maintain stable heat transfer for SMD work
• Conforms to UPC approval for standardised quality indication
Applications
• Suitable for reworking gull-wing packaged components
• Ideal for fine-pitch SMD soldering and repair
• Used with WEP70 controlled-temperature stations
• Can be used for maintenance on older LR20 and LR21 units
• Ideal for fine-pitch SMD soldering and repair
• Used with WEP70 controlled-temperature stations
• Can be used for maintenance on older LR20 and LR21 units
Which stations will accept this tip mechanically and thermally?
It fits into designated holders on the specified WEP70 and legacy LR20 and LR21 handpieces, ensuring proper seating for efficient thermal contact.
How does the tip shape affect solder volume control?
The gull-wing profile concentrates heat at the toe, enabling precise solder transfer and minimising excess solder on adjacent pads.
Are there considerations for replacing older tips with this type?
Ensure the receiving tool accepts the listed width and length to preserve original thermal characteristics and fit.
What advantages does the length offer for component access?
The extended 35mm reach lets operators access joints recessed within assemblies without compromising handling or clearance.
관련된 링크들
- Weller ET SMD Surface Mount Soldering Iron Tip for use with WEP70, LR20, LR21 (old generation)
- Weller ETCC 3.2 mm Bevel Soldering Iron Tip for use with WEP70, LR20, LR21 (old generation)
- Weller ETC 3.2 mm Screwdriver Soldering Iron Tip for use with LR21 (old generation), WEP70, LR20
- Weller ETR 1.6 mm Screwdriver Soldering Iron Tip for use with WEP70, LR21 (old generation), LR20
- Weller ETHL 0.8 mm Screwdriver Soldering Iron Tip for use with LR20, WEP70, LR21 (old generation)
- Weller ETD 4.6 mm Screwdriver Soldering Iron Tip for use with LR20, WEP70, LR21 (old generation)
- Weller ETOL 0.8 mm Conical Soldering Iron Tip for use with LR20, WEP70, LR21 (old generation)
- Weller ETL 2 mm Screwdriver Soldering Iron Tip for use with WEP70, LR20, LR21 (old generation)
