제조사부품번호

Weller PTCC7 (370°C) 3.2 mm Bevel 33 mm Soldering Iron Tip for use with TCP (Series Old Generation)

RS 제품 번호:: 179-703
제조사 부품 번호:: 4PTCC7-1
제조업체:: Weller

Weller PTCC7 (370°C) 3.2 mm Bevel 33 mm Soldering Iron Tip for use with TCP (Series Old Generation)

Subtotal (1 unit)*

₩14,460.00

4 개 단위 배송 준비 완료
추가로 2026년 10월 08일 부터 20 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩14,460.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 179-703
제조사 부품 번호:: 4PTCC7-1
제조업체:: Weller

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Weller
	Model Number	PTCC7 (370°C)
	Product Type	Soldering Iron Tip
	Tip Shape	Bevel
	For Use With	TCP (Series Old Generation)
	Tip Series	PT
	Tip Width	3.2 mm
	Tip Length	33mm
	Standards/Approvals	UPC

	모두 선택
	브랜드 Weller
	Model Number PTCC7 (370°C)
	Product Type Soldering Iron Tip
	Tip Shape Bevel
	For Use With TCP (Series Old Generation)
	Tip Series PT
	Tip Width 3.2 mm
	Tip Length 33mm
	Standards/Approvals UPC

Datasheet - 4PTCC7-1

COO (Country of Origin):: MX

Weller Soldering Iron Tip, 3.2mm Tip Width, 33mm Tip Length - 4PTCC7-1

This soldering iron tip is a replacement component designed for use with older TCP handheld tools, providing a precise bevel contact for thermal transfer during soldering operations. It is intended for tasks requiring controlled heat delivery at a defined operating temperature and for technicians maintaining legacy TCP equipment.

Features and Benefits:

• Bevel tip shape offers accurate solder flow control for joints
• Rated to operate at 370°C for consistent thermal performance
• UPC approval confirms conformity to specified standards
• Compatible with legacy TCP tools enabling straightforward swaps
• Slim-width contact improves access in confined assemblies

Applications

• Suitable for repair work on vintage TCP handheld stations
• Ideal for precision electronic assembly and rework
• Used with TCP soldering handles during component replacement
• Can be used for surface-contact soldering on small pads
• Used for maintenance tasks in electronics service centres

What is the tip’s length and how does that affect reach?

The tip measures 33mm in length, allowing extended reach into recessed areas without altering heat distribution at the contact point.

What contact width is provided for fine-detail work?

The contact surface is 3.2mm wide, balancing adequate heat transfer with the ability to work on small pads and leads.

Which approval indicates adherence to manufacturing criteria?

It carries UPC approval, indicating it meets the specified conformity assessment referenced by that mark.

Which tool families will accept this replacement?

It is made for compatibility with older TCP-series handheld tools, allowing direct replacement in those models.