TE Connectivity Transparent Polyolefin Solder Sleeve 26mm Length 1.7 mm Cable Diameter 0.4 mm Cable Diameter

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Solder Sleeves 열람하기

Subtotal (1 Box of 100 units)*

₩109,300.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 116 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Box(es)
Per Box
한팩당*
1 +₩109,300.00₩1,092.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
136-2079
제조사 부품 번호:
B-155-9001
제조업체:
TE Connectivity
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

TE Connectivity

Product Type

Solder Sleeve

Sub Type

Terminator

Sleeve Length

26mm

Material

Polyolefin

Dielectric Strength

2kV

Minimum Cable Diameter

0.4mm

Maximum Cable Diameter

1.7mm

Colour

Transparent

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

125°C

Standards/Approvals

ANSI J-STD-004, ANSI J-STD-006

Series

B-155

Shrink Temperature

85°C

COO (Country of Origin):
MX

Solder Sleeves®


A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

관련된 링크들