STMicroelectronics iNEMO inertial module Kit Accelerometer Sensor Evaluation Kit for ISM330IS STEVAL-MKI109V3

모든 Sensor Development Tools 열람하기

Subtotal (1 unit)*

₩54,783.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩54,783.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
265-7043
제조사 부품 번호:
STEVAL-MKI230KA
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Product Type

Sensor Development Tool

Sensor Technology

Accelerometer Sensor

Featured Device

ISM330IS

For Use With

STEVAL-MKI109V3

Kit Classification

Evaluation Kit

Kit Name

iNEMO inertial module Kit

Standards/Approvals

RoHS

COO (Country of Origin):
IT

iNEMO inertial module kit based on ISM330IS


The STEVAL-MKI230KA evaluation kit consists of the STEVAL-MKI230A main sensing board, with a square PCB, which mounts the ISM330IS 3-axis accelerometer and 3-axis gyroscope with embedded ISPU, the STEVAL-MKIGIBV5 adapter board, and a flat cable. The main board is connected to the adapter board through the flat cable to make it compatible with the STEVAL-MKI109V3.;The sensing board can be directly attached to the system to be measured through the provided adhesive.

The ISM330IS is soldered exactly in the center of the board.

The STEVAL-MKIGIBV5 can be plugged into a standard DIL24 socket. The kit provides the complete ISM330IS pin-out and comes ready-to-use with the required decoupling capacitors on the VDD power supply line.;This adapter is supported by the STEVAL-MKI109V3 motherboard, which includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico-GUI), or dedicated software routines for customized applications.

Key features


•User friendly ISM330IS board

•Complete ISM330IS pin-out for a standard DIL24 socket

•Fully compatible with the STEVAL-MKI109V3 motherboard

•RoHS compliant

관련된 링크들