Renesas Electronics US082-ZMOD4510EVZ Gas Sensor Evaluation Module for ZMOD4510 ZMOD4510

모든 Sensor Development Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩50,139.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩50,139.60
5 +₩49,143.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
233-9198
제조사 부품 번호:
US082-ZMOD4510EVZ
제조업체:
Renesas Electronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Renesas Electronics

Sensor Technology

Gas Sensor

Featured Device

ZMOD4510

For Use With

ZMOD4510

Kit Classification

Evaluation Module

Kit Name

US082-ZMOD4510EVZ

The Renesas Electronics US082-ZMOD4510EVZ board enables quick prototyping of the ZMOD4510 gas sensor module for outdoor air quality in a custom system design. The board provides a standard Pmod Type 6A (Extended I²C) connection for the on-board sensor to plug into any required MCU evaluation kit with a matching connector. The board features Pmod connectors on both sides of the board to allow additional Type 6/6A boards to be connected in a daisy-chained solution with multiple sensors on the same MCU Pmod connector. Software support present in the Renesas IDE (e² studio) provides code generation to connect the sensor and the MCU significantly reducing development time. Because of the standard connector and software support, this board is the best choice to rapidly create an IoT system.

Supports different methods of operation, including Total Outdoor Air Quality (1st Gen) and Ultra-Low Power with selective ozone measurements (2nd Gen)
Supports international standards for air quality, such as the US Environmental Protection Agency (EPA)
Standardized Type 6A Pmod connector supports I²C Extended interface
Dual connectors allow pass-through signals for daisy-chained solutions
Software support in e² studio minimizes development time with one-click code generation

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들