The MS5637 peripheral module provides the necessary hardware to interface the MS5637 digital barometric pressure and temperature sensor to any system that utilizes Pmod compatible expansion ports configurable for I2C communication. The MS5637 sensor is a self-contained pressure and temperature sensor that is fully calibrated during manufacture. The sensor can operate from 1.5V to 3.6V. The sensor module includes a high-linearity pressure sensor and an ultra-low power 24 bit _Σ ADC with internal factory-calibrated coefficients.

Measures pressure from 300mbar to 1200mbar
Measures temperature from -40°C to 125°C
I²C communication
Fully calibrated
Fast response time
Very low power consumption
4-pin Grove compatible connector
I²C interface
Parameters stored on chip
300 to 1200mbar pressure range
-40°C to 85°C temperature range
Very low power consumption
Operates 5V
Altitude resolution at sea level is 20 cm of air
Fast conversion time 0.5ms typical

수량	한팩당
1 - 4	₩45,157.60
5 - 9	₩44,255.20
10 +	₩43,371.60

모두 선택	제품 정보	값
	브랜드	TE Connectivity
	Sensor Technology	Barometric Pressure Sensor, Temperature & Humidity Sensor
	For Use With	Digilent Pmod
	Kit Classification	Add On Board
	Kit Name	MS5637

	모두 선택
	브랜드 TE Connectivity
	Sensor Technology Barometric Pressure Sensor, Temperature & Humidity Sensor
	For Use With Digilent Pmod
	Kit Classification Add On Board
	Kit Name MS5637

TE Connectivity MS5637 Barometric Pressure Sensor, Temperature & Humidity Sensor Add On Board Digilent Pmod

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

관련된 링크들