MikroElektronika ECG Click Bundle Heart Rate Sensor MikroBus Click Board

모든 Sensor Development Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩103,907.60

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 3월 05일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩103,907.60
5 - 24₩101,820.80
25 +₩99,790.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
136-0854
제조사 부품 번호:
MIKROE-2458
제조업체:
MikroElektronika
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

MikroElektronika

Product Type

Sensor Development Tool

Sensor Technology

Heart Rate Sensor

Kit Classification

MikroBus Click Board

Kit Name

ECG Click Bundle

Standards/Approvals

RoHS

ECG click mikroBUS™ Bundle


The MikroElektronika ECG Click Board is an accessory board that provides a simple method of adding electrocardiogram measurement hardware to a development platform.

This starter kit variant provides the required electrodes and cables in addition to the ECG Click Board.

Like all Click Boards the ECG Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.

The ECG Click measures electrical activity of the heart through 3 electrodes taped to the skin that connect to the board via a 3.5mm jack. The circuity of the ECG click amplifies the electrical signals from the heart and filters out noise, providing a clean and clear signal for the mother development board.

The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.

Features


Fits the popular mikroBUS™ socket

7-block design (protection, preamplifier, high-pass filter #1, amplifier, high-pass filter #2, low-pass filter, DRL circuit)

Jumpers for setting output voltage range

Trimmer potentiometer to adjust gain

MCP609 Op Amp

MAX6106 Voltage Reference IC

ESD, Overvoltage and Overcurrent protection

Analogue output (mikroBUS™ AN pin)

5 V power supply

Package Contents


1 x ECG Click Board

1 x 3 Lead ECG Cable with 3.5mm Jack

30 x Single Use ECG Electrodes

Click mikroBUS™ Biomedical Boards


Note

The ECG Click Board is available as a separate item, MikroElektronika part MIKROE-2455.
The target board requires an MCU with a minimum 10-bit ADC.
Click board comes with the header strips soldered.

관련된 링크들