제조사부품번호

ifm electronic SmartL25 4DO T C Series I/O Module, 4 Port

RS 제품 번호:: 739-6759
제조사 부품 번호:: AC2252
제조업체:: ifm electronic

ifm electronic SmartL25 4DO T C Series I/O Module, 4 Port

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩332,923.50

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩332,923.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 739-6759
제조사 부품 번호:: AC2252
제조업체:: ifm electronic

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ifm electronic
	Product Type	I/O Module
	Inlet Connection Type	Combicon Plug With Screw Terminals
	Number of Ports	4
	Maximum Operating Voltage	31.6V
	Series	SmartL25 4DO T C
	Housing Material	Polyamide
	IP Rating	IP20
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	EN 50295, cRUus, IEC 60947-5-1
	Output Type	Digital Transistor PNP
	Minimum Operating Voltage	26.5V

	모두 선택
	브랜드 ifm electronic
	Product Type I/O Module
	Inlet Connection Type Combicon Plug With Screw Terminals
	Number of Ports 4
	Maximum Operating Voltage 31.6V
	Series SmartL25 4DO T C
	Housing Material Polyamide
	IP Rating IP20
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals EN 50295, cRUus, IEC 60947-5-1
	Output Type Digital Transistor PNP
	Minimum Operating Voltage 26.5V

ASi Slave, Smartline Type, 4 outputs

COO (Country of Origin):: DE

AS-I Slave Smartline, 4 outputs

DIN rail mounting

Combicon connection

String mounting possible

Addressing socket

Version 2.1

Digital outputs, transistor PNP

Voltage range: 20-30Vdc

Total current consumption from AS-I: <50mA

Short circuit proof

Electrically separated

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.

A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).

By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.

The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.

Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring

High data speed

Low cost installation

Intelligent diagnostics

Easy to learn and install

Highly flexible

Can connect to other fieldbus systems

User-friendly

Off-site pre-assembly and test

Easy maintenance

Faster on-site commissioning

Host or stand alone use

Able to use standard sensors and actuators (using modules)

ifm electronic SmartL25 4DO T C Series I/O Module, 4 Port

AS-I Slave Smartline, 4 outputs

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

Benefits of AS-I

관련된 링크들