V20 and V30 Quick Install Safety Camera

The V300 WS is a completely new sensor based on innovative camera technology, developed for monitoring hazardous points on typically rectangular action openings – with just one component, mounted in a corner of the safety area, saving space and in a protected location. The “one sensor fits all sizes” concept puts an end to the numerous types – one variant covers the most diverse safety areas up to a maximum width of 1 m and with a maximum side ratio of 2:1. The optics used have a wide aperture angle, the invisible LED light beam in combination with the reflector ensures robust monitoring that is resistant to environmental factors. The V300 WS is Type 3 (SIL2) and is thus a real substitute for Type 4 solutions while the V200 WS is a convincing economical solution if only Type 2 is required.

Simple to install, no specialist knowledge or configuration software needed

Intuitive one button set up

No blind spots

One system fits all protective field sizes

Components and the evaluation unit are integrated in a single compact housing

Sensor can handle tolerances of several centimetres along the optical axis

Flexible protective field geometries

Automatic alignment

Restart/reset, EDM integrated

2 x 250 mA switching outputs

1 x EDM input, 1 x restart interlock input, 1 x teach/sync input

Response time 20 ms

IP54 enclosure rating

Safety Camera

Note

A resolution set has to be ordered separately

모두 선택	제품 정보	값
	브랜드	SICK
	Series	V300 Work Station
	Product Type	Sensor Actuator Cable
	Connector Type A	M12 Socket
	Number of Contacts A	8
	Number of Contacts B	8
	Voltage	24 V
	IP Rating	IP54
	Standards/Approvals	RoHS

	모두 선택
	브랜드 SICK
	Series V300 Work Station
	Product Type Sensor Actuator Cable
	Connector Type A M12 Socket
	Number of Contacts A 8
	Number of Contacts B 8
	Voltage 24 V
	IP Rating IP54
	Standards/Approvals RoHS

SICK 8 way M12 Socket to 8 way Sensor Actuator Cable

V20 and V30 Quick Install Safety Camera

Safety Camera

Note

관련된 링크들