SICK Female 3 way M8, Straight to Male 3 way M8 Connector Cable, 10 m

This connector and cable assembly is a 10m sensor connection solution for industrial automation, providing a straight M8 female to straight M8 male Interface for sensor and actuator signals. It is intended for use where a compact, flexible link is required between devices in harsh environments, offering a polyurethane-jacketed cable and screw-lock connectors for secure electrical connections.

• Rated impulse voltage 1.5 kV for high-voltage transient resistance
• Three-contact A-coded connectors enable standard sensor wiring
• PUR halogen-free jacket withstands oils and lubricants
• IP65 IP66K IP67 protection resists dust and high-pressure washdown
• Bending cycles 10,000,000 support extensive dynamic use
• Current loading 4A accommodates common sensor loads

• Suitable for robot cabling and moving machine parts where torsion occurs
• Ideal for use in drag chains and continuous traversing systems
• used with proximity sensors and actuators in automated lines
• Can be used for signal extension in oil-contaminated zones
• Suitable for installations requiring washdown and high ingress protection

The assembly uses a 3-core PUR cable with a 0.25mm² conductor cross-section and a 4.1mm diameter designed for flexible use and drag-chain operation.

Both ends feature screw-lock M8 connectors with metal locking nuts and an FKM seal to ensure mechanical retention and environmental sealing.

The cable withstands a test voltage of 2,500V AC, a nominal cable voltage of 300V AC, and operating temperatures from −40 °C (stationary) up to +80 °C for most dynamic uses.

The assembly tolerates torsion of 180° per metre with up to 2,000,000 torsion cycles and a traversing speed up to 3 m/s while limiting acceleration to ≤10 m/s².