Lapp OLFLEX CLASSIC 110 CY Control Cable, 12 Cores, 1.5 mm² CSA 16 AWG, Screened, 100 m, Transparent Polyvinyl Chloride
- RS 제품 번호:
- 280-5097
- Distrelec 제품 번호:
- 301-10-604
- 제조사 부품 번호:
- 1135312
- 제조업체:
- Lapp
Subtotal (1 reel of 100 units)*
₩1,609,750.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
릴당 | 릴당 | 한팩당* |
|---|---|---|
| 1 + | ₩1,609,750.00 | ₩16,096.56 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 280-5097
- Distrelec 제품 번호:
- 301-10-604
- 제조사 부품 번호:
- 1135312
- 제조업체:
- Lapp
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Lapp | |
| Series | OLFLEX CLASSIC 110 CY | |
| Product Type | Control Cable | |
| Number of Cores | 12 | |
| Cross Sectional Area | 1.5 mm² | |
| Conductor Material | Copper | |
| Jacket Material | Polyvinyl Chloride | |
| Jacket Colour | Transparent | |
| Screened/Unscreened | Screened | |
| Cable Length | 100m | |
| Outside Diameter | 14.8 mm | |
| Voltage | 4000 V | |
| Minimum Operating Temperature | -40°C | |
| Conductor Type | Stranded | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | IEC 60228, Class 5, DIN EN 50334, EN 50525-2-51, VDE-REG 7030 | |
| Fire Behaviour | Flame Retardant acc. to IEC 60332-1-2 | |
| American Wire Gauge | 16AWG | |
| Core Strands | 12 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Lapp | ||
Series OLFLEX CLASSIC 110 CY | ||
Product Type Control Cable | ||
Number of Cores 12 | ||
Cross Sectional Area 1.5 mm² | ||
Conductor Material Copper | ||
Jacket Material Polyvinyl Chloride | ||
Jacket Colour Transparent | ||
Screened/Unscreened Screened | ||
Cable Length 100m | ||
Outside Diameter 14.8 mm | ||
Voltage 4000 V | ||
Minimum Operating Temperature -40°C | ||
Conductor Type Stranded | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals IEC 60228, Class 5, DIN EN 50334, EN 50525-2-51, VDE-REG 7030 | ||
Fire Behaviour Flame Retardant acc. to IEC 60332-1-2 | ||
American Wire Gauge 16AWG | ||
Core Strands 12 | ||
제외
- COO (Country of Origin):
- DE
The Lapp OLFLEX Classic 110 CY cables are VDE approved power and control cables for flexible use. Use and fixed installation for medium mechanical load conditions. They are also suitable for use in dry damp or wet areas. If using outdoors observe the indicated temperature range. These cables are limited suitable for free and continuously recurring movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
Flame retardant
Silver Grey colour
Used in dry and damp and wet areas
Resistant to the effects of acids and alkalis and oils at room temperature
UV protection
관련된 링크들
- Lapp OLFLEX CLASSIC 110 CY Control Cable, 5 Cores, 1.5 mm² CSA 16 AWG, Screened, 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable, 25 Cores, 0.5 mm² CSA 20 AWG, Screened, 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable, 3 Cores, 1.5 mm² CSA 16 AWG, Screened, 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 Control Cable, 7 Cores, 1 mm² CSA 18, Screened, Transparent Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable, 4 Cores, 0.75 mm² CSA 18, Screened, Transparent Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable, 3 Cores, 0.75 mm² CSA 18, Screened, Transparent Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable, 5 Cores, 0.75 mm² CSA 18, Screened, Transparent Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable, 7 Cores, 0.75 mm² CSA 18, Screened, Transparent Polyvinyl Chloride Sheath
