SICK Female 4 way M8 to Unterminated Sensor Actuator Cable, 5 m

모든 Sensor & Actuator Cables 열람하기

Subtotal (1 unit)*

₩21,375.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 28 개 단위 배송 준비 완료
  • 추가로 2026년 4월 15일 부터 30 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩21,375.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
225-3077
제조사 부품 번호:
YG8U14-050VA3XLEAX
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Sensor Actuator Cable

Series

YG8U14-050VA3XLEAX

Jacket Colour

Grey

Cable Length

5m

Jacket Material

Polyvinyl Chloride

Connector Type A

M8

Connector Gender A

Female

Number of Contacts A

4

Connector Type B

Unterminated

Voltage

60 V

Standards/Approvals

CE, UL

IP Rating

IP67

COO (Country of Origin):
CZ

Sick YG8U14-050VA3XLEAX Series Sensor Actuator Cable, 5m Cable Length, Grey Jacket - YG8U14-050VA3XLEAX


This sensor actuator cable provides a robust, industrial connection between M8 devices and controllers for signal transmission in automation environments. It combines a right-angled female M8 connector with an unterminated free end, designed for sensor and actuator wiring where a flexible cable run and field termination are required.

Features & Benefits


• 5 m length for extended reach in machine layouts
• 4-pin M8 connection supporting sensor/actuator signals
• PVC jacket in grey resistant to common chemicals
• Rated for ≤60V DC enabling low-voltage control circuits
• IP65 IP66K IP67 enclosure rating for harsh environments
• 4A current capacity for typical I/O loads

Applications


• Suitable for proximity sensor wiring in production lines
• Ideal for actuator connections on assembly machinery
• used with distributed I/O modules requiring field termination
• Can be used for conveyor control signal linking
• Suitable for repair or replacement of damaged sensor leads

What conductor size and type does it use?


The cable contains four conductors with a cross-section of 0.25mm² each and is unshielded.

What temperature ranges can it tolerate during installation and operation?


It is rated for flexible operation from −5 °C to +80 °C and stationary installation from −30 °C to +80 °C, with the connector head specified to −25 °C to +85 °C.

How should the connector be torqued during assembly?


The angled M8 female connector requires a tightening torque of 0.4 N·m using a SW9 tool.

What mechanical flexing limits apply to cable routing?


For dynamic applications maintain a bending radius greater than 10x the cable diameter

for fixed runs use greater than 5x the diameter.

Which materials comprise the connector and seal for chemical exposure considerations?


The connector body is TPU with a zinc die-cast nickel-plated locking nut and an FKM seal.

관련된 링크들