SICK Female 3 way M8 to Unterminated Free End Sensor Actuator Cable, 10 m

모든 Sensor & Actuator Cables 열람하기

Subtotal (1 unit)*

₩43,484.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 3월 23일 부터 31 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩43,484.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
225-3042
제조사 부품 번호:
YF8U13-100UA1XLEAX / 2094789
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Series

YF8U13-100UA1XLEAX

Product Type

Sensor Actuator Cable

Jacket Colour

Black

Jacket Material

Polyurethane

Cable Length

10m

Number of Contacts A

3

Connector Gender A

Female

Connector Type A

M8

Connector Type B

Free End

Connector Gender B

Unterminated

IP Rating

IP67

Standards/Approvals

UL

COO (Country of Origin):
DE

Sick YF8U13-100UA1XLEAX Series Sensor Actuator Cable, 10m Length, Black Jacket - YF8U13-100UA1XLEAX / 2094789


This sensor actuator cable provides a robust connection between field devices and control systems in industrial environments. Designed for automated and electronic installations, it combines a Compact M8 female connector with an unterminated free end over a 10m polyurethane-sheathed cable, suitable for use where sealed electrical connections and flexible routing are required.

Features & Benefits


• 3-pin M8 Interface supports common sensor and actuator signals
• 10m polyurethane jacket allows continuous drag-chain operation
• Rated for ≤60V DC enabling low-voltage control circuits
• IP65/IP66K/IP67 enclosure rating protects against dust and high-pressure washdown
• 4A current capacity accommodates typical sensor loads
• Halogen-free PUR composition reduces hazardous emissions in fires

Applications


• Suitable for connecting proximity sensors in conveyors and pick-and-place systems
• Ideal for actuator wiring in machine-tool automation cells
• used with distributed I/O modules on mobile gantries and trolleys
• Can be used for wiring sensors in oil- and lubricant-exposed zones
• Suitable for replacement cabling in industrial robot teach pendants

What conductor size and construction does it use?


The cable contains three conductors with a 0.25mm² cross-section in an unshielded configuration.

How does it perform under continuous motion?


It is rated for drag-chain use with a bending radius greater than 10x cable diameter and endurance over 10,000,000 bending cycles.

What temperature range can it tolerate during stationary installation?


It operates in stationary positions from −40 °C to +80 °C.

Is the connector assembly suitable for standard torque fittings?


The screw-style locking nut is zinc die-cast with a recommended tightening torque of 0.4 N·m and a width across flats of 9mm.

How does it resist electrical stress and noise?


The assembly supports a rated impulse voltage of 1.5 kV and an insulation resistance of 100 MΩ for low-voltage circuits.

관련된 링크들