Siemens Male 4 way M8 to Female 4 way M8 Sensor Actuator Cable, 5 m

This power cable provides a preassembled four-conductor connection for 24V DC supply in industrial control installations. It is supplied with a male M8 connector at one end and a female M8 socket at the other, mounted on a flexible polypropylene-insulated core and PVC sheath. The assembly is rated for use in environments requiring dust and water resistance and is suitable for linking distributed I/O modules and controllers where a compact, factory-terminated lead is required.

• 4-pin M8 connection supports four-conductor power distribution
• 24V DC capability for low-voltage control circuits
• IP65 IP67 protection enables washdown and outdoors use
• 2.5 million bending cycles for extended dynamic motion
• Silicone-free materials reduce contamination risk in assemblies

• Suitable for powering ET 200AL and similar modules
• Used with sensors/controllers requiring M8 4-pin inputs
• Ideal for cable-carrier installations with frequent motion
• Can be used in washdown or damp production areas
• Suitable for inline power routing between distributed nodes

The cable can be handled between -30°C and 80°C during fitting.

Conductors are 0.50mm² cores with polypropylene core insulation and a PVC outer sheath.

The sheath is grey PVC with core insulation in white, brown, blue and black.

It carries EAC approval and complies with relevant classification listings.