SICK Mounting Bracket for Use with M30 Sensors, ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 Standard
- RS 제품 번호:
- 797-4911
- 제조사 부품 번호:
- BEF-WN-M30
- 제조업체:
- SICK
Subtotal (1 unit)*
₩6,984.90
재고있음
- 72 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩6,984.90 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 797-4911
- 제조사 부품 번호:
- BEF-WN-M30
- 제조업체:
- SICK
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SICK | |
| Accessory Type | Mounting Bracket | |
| Product Type | Bracket | |
| For Use With | M30 Sensors | |
| Hazardous Area Certification | ATEX, IECEx | |
| Standards/Approvals | ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 | |
| 모두 선택 | ||
|---|---|---|
브랜드 SICK | ||
Accessory Type Mounting Bracket | ||
Product Type Bracket | ||
For Use With M30 Sensors | ||
Hazardous Area Certification ATEX, IECEx | ||
Standards/Approvals ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 | ||
- COO (Country of Origin):
- DE
IN4000 Inductive Safety Switch
The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not require a separate coded actuator. Due to the non-contact form of operation, this safety switch is straight forward to adjust and install and offers increased resistance to shock and vibration. The response range of the sensor is monitored spatially and over time, providing increased protection against tampering.
Features
One pulsed output (IN4000 Standard) or two OSSD outputs (IN4000 Direct) for direct connection of sensors to a single safety controller
IP67 or IP69K enclosure rating
Response range of up to 15mm
LED status indicator
Up to performance level PL e / Cat. 4 (EN ISO 13849)
Safe series connection of sensors possible (IN4000 Standard)
Flexi Loop-compatible M12 plug connector
Benefits
Fast diagnostics via LED status indicator
Cascade up to 9 sensors to one controller for reduced costs (IN4000 Standard)
Flexi Loop now enables a safe series connection with enhanced diagnostic capabilities and minimal wiring effort (IN4000 Direct)
Long service life due to durable and low-maintenance design
Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849)
The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards
Safety Limit Switch
관련된 링크들
- SICK Mounting Bracket for Use with M4000 Light Beam, ISO13849-1, ISO13850, EN60947-5-1, EN60947-5-5 Standard
- Smartscan Mounting Bracket for Use with 1K3 Light Curtain, ISO13850, ISO13849-1, EN60947-5-5, EN60947-5-1 Standard
- SICK Type 4 (En Iso 14119), EN ISO 14119, Category 4 (EN ISO 13849) TR4 Safety Switch Actuator Included, Valox
- Jumo, 606715 Series Adjustable Bayonet Thermocouple for Use with Panel-mounting Thermostats, DIN EN ISO 13849-1, EAC, EN
- Telemecanique Sensors Bracket 4.3 mm for Use with XU Series, DIN 40050, IEC 60529, EN/IEC 60947-5-2, EN/IEC 60947-4-2,
- StarTech.com 2 Port USB Card, USB 3.2, EN ISO 13849-1, CAT 3
- Banner, SI-QS-SSU Series Adapter Universal Flexible Actuator for Use with Safety Sensors, EN ISO 13849-1:2015 Standard
- Jumo, 606715 Series Adjustable Bayonet Thermocouple for Use with Panel-mounting Thermostats, cULus, DIN EN ISO 13849-1,