Hammond Steel Self-Tapping Screw 5 mm

모든 Self Tapping Screws 열람하기

Subtotal (1 Bag of 100 units)*

₩15,115.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 38 개 단위 배송 준비 완료
  • 추가로 2026년 3월 10일 부터 45 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Bag(s)
Per Bag
한팩당*
1 +₩15,115.20₩150.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
570-657
제조사 부품 번호:
1551ATS100
제조업체:
Hammond
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Hammond

Product Type

Self-Tapping Screw

Standards/Approvals

No

Material

Steel

Length

5mm

Hammond Enclosure Accessory, Steel PCB Screw Type, 5mm Length - 1551 Series - 1551ATS100


Turn the screw on unsecured printed circuit boards with these enclosure accessories from Hammond. You can use a couple to mount a PCB inside an enclosure from the 1551 series (such as 773-3114). Simply screw them through the board and tighten them onto the mounting bosses in your housing. This fixing is designed specifically for small circuit boards, and each unit has a lid to keep your circuitry under wraps.

Features & Benefits


• Self-tapping for easy fastening without the need to drill pilot holes

• Made from durable steel for a long-lasting securing solution

• Pack of 100 covers the mounting of 50 boards

• Nickel plated to boost resistance to corrosion and wear

Applications


• Outdoor sensors

• Home electronics

• Electrical engineering

• Automotive workshops

Can I use these screws to secure the lid of the enclosure?


No, these screws are only for securing the printed circuit board in place. Lid screws are provided with each enclosure, and you can order spares of these (570-704) separately.

What size are these screws?


These are no.2 x 3/16" screws meaning they have a 2.2mm thread and a 4.5mm length, so they add minimal bulk to your setup. You'll need a Pozidrive screwdriver to secure them.

관련된 링크들