SKF Nitrile Rubber (NBR) Radial Shaft Seal, 85 mm ID, 100 mm OD, 9 mm
- RS 제품 번호:
- 267-3908
- 제조사 부품 번호:
- 85X100X9 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩73,620.00
재고있음
- 추가로 2026년 10월 12일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩7,362.00 | ₩73,620.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3908
- 제조사 부품 번호:
- 85X100X9 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 85mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 100mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 9mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 85mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 100mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 9mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 85mm Inside Diameter, 100mm Outside Diameter - 85X100X9 HMSA10 RG
This radial shaft seal provides a rotating-shaft sealing solution designed to prevent fluid leakage and exclude contaminants in rotating equipment. It is MADE from nitrile rubber and intended for applications where a resilient lip material is required to maintain contact with a moving shaft and preserve system integrity.
Features and Benefits:
• Nitrile rubber construction resists common oils and greases
• Rotary shaft seal design sustains continuous shaft motion
• 9 mm cross-section delivers consistent sealing contact
• 85 mm inner diameter ensures snug shaft engagement
• 100 mm outer diameter offers stable housing fit
• Rotary shaft seal design sustains continuous shaft motion
• 9 mm cross-section delivers consistent sealing contact
• 85 mm inner diameter ensures snug shaft engagement
• 100 mm outer diameter offers stable housing fit
Applications
• Suitable for sealing rotating gearbox shafts
• Ideal for hydraulic motor and pump interfaces
• Used with industrial drive shafts requiring oil retention
• Can be used for replacements in maintenance tasks
• Appropriate for rotating assemblies needing dust exclusion
• Ideal for hydraulic motor and pump interfaces
• Used with industrial drive shafts requiring oil retention
• Can be used for replacements in maintenance tasks
• Appropriate for rotating assemblies needing dust exclusion
What material characteristics affect chemical compatibility?
The lip material is nitrile rubber, which provides compatibility with many lubricants and oils commonly used in rotating equipment.
How does the seal accommodate shaft and housing tolerances?
The design uses a flexible sealing lip that conforms to the shaft at the specified inner diameter while the outer diameter locates in the housing bore.
What physical dimensions determine fitment?
Fit depends on the internal diameter, external diameter and cross-section thickness, which correspond to shaft size and bore depth.
How does the seal perform during continuous rotation?
The sealing geometry is configured for rotary applications to maintain contact under steady rotational motion.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 85 mm ID, 100 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 85 mm ID, 100 mm OD, 9 mm
- SKF Nitrile Rubber (NBR) Seal, 65 mm ID, 85 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 65 mm ID, 85 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 65 mm ID, 85 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 70 mm ID, 85 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 85 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 85 mm OD, 8 mm