SKF Nitrile Rubber (NBR) Radial Shaft Seal, 20 mm ID, 42 mm OD, 10 mm
- RS 제품 번호:
- 267-3643
- 제조사 부품 번호:
- 20X42X10 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩28,700.00
재고있음
- 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩2,870.00 | ₩28,700.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3643
- 제조사 부품 번호:
- 20X42X10 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 20mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 42mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 20mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 42mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 20mm Inside Diameter, 42mm Outside Diameter - 20X42X10 HMS5 RG
This radial shaft seal provides axial sealing for rotating shafts in machinery, preventing fluid leakage and excluding contaminants during shaft rotation. It is intended for rotary sealing duties where a resilient lip material interfaces with a turning shaft to maintain a lubricant barrier and protect internal components.
Features and Benefits:
• Nitrile elastomer lip provides fuel and oil resistance
• Rotary configuration minimises leakage at rotating interfaces
• 10mm radial thickness resists extrusion under static loads
• Designed for shaft applications to reduce contamination ingress
• Robust material delivers consistent sealing across operating cycles
• Rotary configuration minimises leakage at rotating interfaces
• 10mm radial thickness resists extrusion under static loads
• Designed for shaft applications to reduce contamination ingress
• Robust material delivers consistent sealing across operating cycles
Applications
• Suitable for maintenance replacement in gearboxes and pumps
• Ideal for automotive rotating assemblies requiring oil retention
• Used with industrial drives where lubricant containment is required
• Can be used for light engineering rotating shafts in machinery
• Suitable for workshop spares stock for routine seal changes
• Ideal for automotive rotating assemblies requiring oil retention
• Used with industrial drives where lubricant containment is required
• Can be used for light engineering rotating shafts in machinery
• Suitable for workshop spares stock for routine seal changes
What shaft clearance does the seal accept?
It is intended to run on shafts with an internal bore of 20mm.
What external housing size is required for fitting?
The outer diameter measures 42mm so housings must accommodate a 42mm external seal seat.
What material composes the sealing lip and how does it behave?
The lip is MADE from nitrile rubber which resists common oils and retains flexibility for dynamic sealing.
How thick is the sealing body and why does that matter?
The body thickness is 10mm which helps resist deformation and supports the sealing lip under load.
Is this suitable as a direct replacement for worn rotary oil seals?
It is suitable where dimensions and material properties match the original seal specifications.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 20 mm ID, 42 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 22 mm ID, 42 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 42 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 62 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 27 mm ID, 42 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 65 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 55 mm OD, 8 mm