SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 62 mm OD, 7 mm
- RS 제품 번호:
- 267-3543
- 제조사 부품 번호:
- 38X62X7 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩32,350.50
일시적 품절
- 2026년 6월 19일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩3,235.05 | ₩32,350.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3543
- 제조사 부품 번호:
- 38X62X7 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 38mm Inside Diameter, 62mm Outside Diameter - 38X62X7 HMSA10 RG
This radial shaft seal is designed to separate rotating and stationary components, preventing lubricant loss and contamination ingress in machinery. It features a rubber outer body with an elastomeric primary sealing lip and an auxiliary non‑contacting lip to improve exclusion of dust and debris while maintaining fluid retention under typical industrial operating conditions.
Features & Benefits
• Garter spring maintains lip contact and consistent sealing pressure
• Auxiliary non‑contacting lip improves contamination exclusion
• Rubber outside diameter ensures secure housing fit and vibration damping
• Accommodates shaft misalignment for extended service life
• Auxiliary non‑contacting lip improves contamination exclusion
• Rubber outside diameter ensures secure housing fit and vibration damping
• Accommodates shaft misalignment for extended service life
**Applications**
• Suitable for bearings in automation and robotics assemblies
• Ideal for rotating shafts in electrical motor drives
• Used with gearboxes requiring oil retention and dust exclusion
• Can be used for rotating Seals in mechanical actuators and couplings
• Suitable for maintenance replacement in industrial pumps
• Ideal for rotating shafts in electrical motor drives
• Used with gearboxes requiring oil retention and dust exclusion
• Can be used for rotating Seals in mechanical actuators and couplings
• Suitable for maintenance replacement in industrial pumps
What temperatures can it tolerate during operation?
It operates continuously between -40°C to 100°C and withstands short peaks to 120°C.
How fast can the shaft rotate while remaining effective?
The seal is rated for circumferential speeds up to 6.72 m/s and rotational speeds up to 3,360 r/min.
How does the seal cope with slight pressure differences?
It is designed for low pressure differentials of around 0.03 N/mm², suitable for typical oil‑retaining applications.
What materials form the static and dynamic sealing elements?
The housing‑facing outside diameter is rubber with metal reinforcement, while the sealing lip is nitrile rubber (NBR).
Are there recommended auxiliary parts for installation?
A thin protective sleeve such as a Speedi‑Sleeve can be used where shaft surface damage is present to aid fitting.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 62 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 62 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 62 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 62 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 54 mm ID, 62 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 62 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 62 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 62 mm OD, 7 mm