SKF Nitrile Rubber (NBR) Radial Shaft Seal, 35 mm ID, 52 mm OD, 8 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩32,020.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 70 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩3,202.00₩32,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3478
제조사 부품 번호:
35X52X8 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

35mm

Outside Diameter

52mm

Seal Type

Rotary Shaft Seal

Thickness

8mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 35mm Inside Diameter, 52mm Outside Diameter - 35X52X8 HMS5 RG


This radial shaft seal provides a sealed Interface for rotating shafts, preventing fluid escape and ingress in rotary equipment. It is designed for applications where a resilient sealing lip is required around a moving shaft, operating within standard mechanical assemblies that demand consistent contact sealing.

Features and Benefits:


• Nitrile rubber construction offers chemical resistance and oil compatibility
• Rotary shaft design maintains continuous lip contact during rotation
• 8mm thickness delivers stable axial support under load
• Withstands common operating temperatures suitable for rubber compounds
• Provides radial sealing to limit lubricant loss and contamination ingress

Applications


• Suitable for sealing shafts in electric motors and gearboxes
• Used with pumps to prevent lubricant leakage from housings
• Ideal for rotating shafts in industrial machinery assemblies
• Can be used for routine replacement of worn shaft Seals
• Used for maintenance on small mechanical drives and couplings

What material properties affect chemical and oil resistance?


The elastomeric composition determines swelling and compatibility with hydrocarbons and common lubricants.

How does the seal accommodate shaft rotation without Rapid wear?


The lip profile and material resilience maintain a contact Interface that reduces abrasion while preserving sealing pressure.

What should be checked during replacement to ensure a correct fit?


Inspect shaft surface finish, housing bore condition and concentricity to prevent edge damage and leakage.

How does thickness influence installation and sealing performance?


Increased axial section thickness provides greater resistance to extrusion and improves axial stability under pressure.

관련된 링크들