SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 50 mm OD, 7 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩25,954.50

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
한팩당*
10 +₩2,595.45₩25,950.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3471
제조사 부품 번호:
35X50X7 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Seal, 35mm Inside Diameter, 50mm Outside Diameter - 35X50X7 HMSA10 RG


This seal is a rotary shaft sealing component designed to prevent fluid leakage and contamination in rotating equipment within industrial systems. It is constructed from a resilient elastomer and installed around shafts to maintain operational integrity in machinery used across automation, electronics and mechanical settings.

Features and Benefits:


• Nitrile elastomer resists oil and common hydraulic fluids • Rotary lip geometry maintains dynamic sealing under rotation • Thin cross-section permits Compact assembly integration • Robust material performance supports routine maintenance cycles • Compatible with standard bearing housings for simplified replacement

Applications


• Suitable for sealing oil-retaining housings in electric motors • Ideal for rotary shafts in industrial gearboxes • Used with pump drives in hydraulic control systems • Can be used for protection of bearing assemblies in automation equipment

What material properties affect chemical resistance in this item?


The elastomeric compound offers good resistance to mineral oils and greases, making it appropriate for conventional lubrication environments while limiting swelling from petroleum-based fluids.

How does the component behave under rotational motion?


The sealing lip maintains contact with the shaft during rotation to limit fluid escape while allowing shaft movement

wear rates depend on shaft finish and running speed.

What installation considerations improve service life?


Proper seating in the housing bore and use of the correct shaft surface condition and lubrication during assembly reduce initial wear and extend operational life.

How does the design manage contamination ingress?


The configured sealing Interface sheds external particles and helps prevent ingress that could accelerate bearing wear when used in typical industrial settings.

관련된 링크들