SKF Nitrile Rubber (NBR) Radial Shaft Seal, 32 mm ID, 43 mm OD, 7 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩28,700.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩2,870.00₩28,700.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3412
제조사 부품 번호:
32X43X7 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

32mm

Outside Diameter

43mm

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 32mm Inside Diameter, 43mm Outside Diameter - 32X43X7 HMSA10 RG


This radial shaft seal provides a rotating-shaft sealing solution designed to prevent fluid leakage and exclude contaminants in machinery. It is intended for use where a tight Interface between a rotating shaft and a housing is required, offering material compatibility suited to common industrial fluids and an appropriate contact geometry for dynamic sealing applications.

Features and Benefits:


• Nitrile rubber construction resists oil-based fluids
• Rotary seal design maintains lip contact during rotation
• 7mm cross-section supports axial stability under load
• 32mm bore enables Compact shaft sealing arrangements
• 43mm outer diameter ensures consistent housing fit

Applications


• Suitable for sealing gearbox output shafts
• Used with electric motor rotary interfaces
• Ideal for small pump shaft sealing duties
• Can be used for automotive accessory shafts
• Used for industrial conveyor roller shafts

What material properties influence compatibility with oils?


The seal is moulded from nitrile rubber which offers resistance to many oil-based lubricants and provides flexibility at the sealing lip for dynamic contact.

How should the component be accommodated in a bore for correct installation?


The outer diameter requires a housing bore sized to accept a 43mm outside section to achieve an interference fit and secure axial positioning during operation.

What shaft size is required to ensure proper sealing engagement?


The internal diameter is 32mm and should match the shaft journal diameter closely to maintain the intended sealing contact and minimise leakage paths.

How does thickness affect mechanical behaviour during operation?


The 7mm thickness contributes to radial stiffness and lip support, helping the seal maintain axial alignment and resist extrusion under typical assembly loads.

관련된 링크들